{"title":"Marine and Auto Coatings","description":"\u003cp\u003eAt Trade Paint Direct, we stock a range of marine and auto coatings that are sure to bring the high quality results you require. A boat or car can be your pride and joy so you will undoubtedly want to do all you can to ensure it remains looking at its very best, which is where our product range comes in. We supply paints and coatings that can protect and enhance the appearance of wood, on the hull of a boat for instance, as well as products which can be applied to tarnished or dull fibreglass or plastic, such as car bumpers, that can restore colour and bring it back to its former glory.\u003c\/p\u003e\r\n\u003cp\u003eOur selection of marine and auto coatings are available at highly competitive prices to make looking after your boat or car easy and affordable. Please take a closer look at our products below to find out more on how they could benefit you.\u003c\/p\u003e","products":[{"product_id":"owatrol-net-trol-nettrol","title":"Owatrol Net-Trol - Nettrol","description":"\u003cp\u003eNet-Trol is safe to use on all exterior wood types and is also an excellent degreaser for use on tropical hardwoods to allow finishes like \u003ca title=\"Deks Olje D1 hard wood oil\" href=\"https:\/\/www.owatroldirect.co.uk\/product\/deks-olje-d1\/\" rel=\"nofollow\"\u003eDeks Olje D1 \u003c\/a\u003eto penetrate. Net-Trol can remove stains caused by tannin bleed and will remove all traces of weathering caused by mildew, pollution and UV rays. It will also neutralise wood surfaces which have been stripped with a stripping product such as Owatrol’s \u003ca title=\"Diulunett Gel stripper\" href=\"https:\/\/www.owatroldirect.co.uk\/product\/dilunett-gel\/\" rel=\"nofollow\"\u003eDilunett\u003c\/a\u003e or \u003ca title=\"Prepdeck professional wood stripper\" href=\"https:\/\/www.owatroldirect.co.uk\/product\/prepdeck\/\" rel=\"nofollow\"\u003ePrepdeck\u003c\/a\u003e, leaving the surface ready for applying your chosen finish.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNet-Trol is not only for use on wood surfaces though – you can also use it to restore the lustre to faded plastics dulled by weathering and UV rays. It can also be used to remove rust stains and to clean discoloured stone and cement. Net-Trol is biodegradable and does not contain solvents or bleach. It’s not harmful to plants and shrubs so it’s safe to use in the garden!\u003c\/p\u003e\n\u003ch2\u003eIdeal Uses for Net-Trol Wood Cleaner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReviving neglected fence panels\u003c\/li\u003e\n\u003cli\u003eCleaning greyed wooden garden furniture\u003c\/li\u003e\n\u003cli\u003eRestoring the colour of decking and cladding\u003c\/li\u003e\n\u003cli\u003eBrightening faded plastic guttering\u003c\/li\u003e\n\u003cli\u003eRemoving rust stains from cement and brickwork\u003c\/li\u003e\n\u003cli\u003eCleaning discoloured paving slabs and driveways\u003c\/li\u003e\n\u003cli\u003eRemoving stains caused by tannin bleed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"hpy-product-info\"\u003e\n\u003cdiv class=\"hpy-info\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"hpy-product-info-container\"\u003e\n\u003cp\u003eNOTE: Wear chemical resistant gloves, safety goggles and protective clothing\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e","brand":"Owatrol","offers":[{"title":"1 Litre","offer_id":31447770267780,"sku":"GK0280CLE0100","price":19.55,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre","offer_id":31447770333316,"sku":"GK0280CLE0250","price":37.35,"currency_code":"GBP","in_stock":true},{"title":"15 Litre","offer_id":31447770398852,"sku":"GK0280CLE1500","price":167.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Net-Trol_1L.png?v=1614608092"},{"product_id":"owatrol-polytrol-colour-restorer","title":"Owatrol Polytrol Colour Restorer","description":"\u003cp\u003ePolytrol is a deep penetrating oil which restores the original colour and appearance of dull or tarnished plastics, gelcoats, metals and other surfaces. It penetrates the surface, re-wetting the pigments to restore their lustre and colour which has been lost through exposure to sunlight, rain and pollution and it also gives corrosion protection.  When used on tarnished metals, it brings back the shine and gives long-term protection against corrosion. Simple to apply using a cloth or soft brush, it’s ready to wipe off in just 10 minutes! It can be used on both horizontal and vertical surfaces  and can even be used on fibreglass (GRP). Polytrol dries to a tough and long-lasting flexible finish which does not leave a film – so it won’t peel or flake.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePolytrol is now available in a handy 250ml spray can, great for quick application and difficult to reach areas. Please see the directions for use to find out how to apply it.\u003c\/p\u003e\n\u003cdiv style=\"text-align: right;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/files\/polytrol-before-after-door-paint-oil_480x480.png?v=1645711063\" alt=\"Front Door Renovation Oil Polytrol by Owatrol\" style=\"float: right; margin: 40px;\"\u003e\u003c\/div\u003e\n\u003ch2\u003eIdeal Uses for Polytrol Colour Restorer\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrightening faded car bumpers\u003c\/li\u003e\n\u003cli\u003eReviving the gelcoat on your boat\u003c\/li\u003e\n\u003cli\u003eRestoring the shine to metal fixtures\u003c\/li\u003e\n\u003cli\u003eRejuvenating flat or chalky paint dulled by weathering\u003c\/li\u003e\n\u003cli\u003eBrightening the surface of tiles in stone, terracota, marble, slate, etc.\u003c\/li\u003e\n\u003cli\u003eReviving the colour of faded garage doors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cdiv class=\"hpy-product-info\"\u003e\n\u003cdiv class=\"hpy-info\"\u003e \u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"hpy-info\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"hpy-product-info-container\"\u003e\n\u003ch2\u003eRestrictions\u003c\/h2\u003e\n\u003cp\u003eDO NOT use Polytrol on \u003cstrong\u003ewhite\u003c\/strong\u003e surfaces, it will not work as Polytrol is designed to restore pigments.\u003c\/p\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eAll surfaces must be clean, dry and free of dirt, grease, grime and mildew. All waxes, polishes, silicone etc. should be completely and thoroughly removed. Treat any mildew with a 50:50 bleach and water solution. Scrub the solution on to the surface and allow it to stand for 10-15 minutes then rinse thoroughly.\u003c\/p\u003e\n\u003ch3\u003eUsing Polytrol on plastic, gelcoat, tiles, painted surfaces etc.\u003c\/h3\u003e\n\u003cp\u003eClean the surface with warm soapy water or\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/net-trol\/\" title=\"Net-Trol\" target=\"_blank\"\u003eNet-Trol\u003c\/a\u003e, rinse thoroughly and allow it to dry for a minimum of 24 hours depending on the surface.\u003c\/p\u003e\n\u003ch3\u003eUsing Polytrol on stone, brick, etc.\u003c\/h3\u003e\n\u003cp\u003eClean the surface with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/net-trol\/\" title=\"Net-Trol wood cleaner\" target=\"_blank\"\u003eNet-Trol\u003c\/a\u003e, rinse thoroughly and allow it to dry for a minimum of 24 hours depending on the surface.\u003c\/p\u003e\n\u003ch3\u003eUsing Polytrol on metal\u003c\/h3\u003e\n\u003cp\u003eClean the surface with warm soapy water and rinse thoroughly or use an appropriate solvent (follow manufacturer’s instructions). Leave the surface to dry for a minimum of 24 hours.\u003c\/p\u003e\n\u003ch2\u003eApplication of Polytrol Colour Restorer\u003c\/h2\u003e\n\u003ch3\u003eGeneral directions\u003c\/h3\u003e\n\u003cp\u003eAlways work in areas that can be completed 10-20 minutes to ensure an even appearance. If the surface absorbs the Polytrol unevenly (i.e. some matt and some shiny patches) move any surplus oil from shiny areas to matt areas. Wipe off any excess Polytrol with a lint-free cloth before it becomes tacky. For a shinier finish, buff the surface with a lint-free polishing cloth.\u003c\/p\u003e\n\u003cp\u003eWhen using the Polytrol 250ml spray can, simply spray on liberally, wipe off any excess and leave to dry.\u003c\/p\u003e\n\u003ch3\u003eApplying Polytrol to plastic, gelcoat, tiles, painted surfaces etc.\u003c\/h3\u003e\n\u003cp\u003eApply Polytrol liberally and evenly with a brush or cloth. Allow it to work for 10-20 minutes. Wipe off any excess with a clean lint-free cloth. Leave it to dry.\u003c\/p\u003e\n\u003ch3\u003eApplying Polytrol to stone, brick, etc.\u003c\/h3\u003e\n\u003cp\u003eApply Polytrol liberally and evenly with a brush or cloth and leave it to work for 10-20 minutes. Brush out or wipe off any excess Polytrol with a clean lint-free cloth. Leave it to dry.\u003c\/p\u003e\n\u003ch3\u003eApplying Polytrol to metal\u003c\/h3\u003e\n\u003cp\u003eApply Polytrol using a fine wire wool (000 grade) soaked in Polytrol and allow it to work for 10-20 minutes. Wipe off any excess Polytrol with a clean lint-free cloth. Leave to dry.\u003c\/p\u003e\n\u003cp\u003eNote: Polytrol is not a surface coating. Its place is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ein\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe surface, not on top.\u003c\/p\u003e\n\u003ch2\u003eMaintenance\u003c\/h2\u003e\n\u003cp\u003eMaintenance is due when a Polytrol treated surfaces shows signs of fading. Prepare and re-treat surfaces as directed above.\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eClean any tools used with white spirit. Polytrol is non-flammable, however any rags, steel wool etc. soaked in Polytrol may spontaneously catch fire if improperly discarded. Rags, steel wool etc must be saturated with water after use or placed in a sealed, water-filled metal container, before disposing of them with household waste. Rags may be laid flat and air-dried before discarding.\u003c\/p\u003e\n\u003ch2\u003eThings to Remember\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover and protect everything you do not wish to treat.\u003c\/li\u003e\n\u003cli\u003eApply between +5°C and +35°C.\u003c\/li\u003e\n\u003cli\u003eDo not apply in direct sunlight or on to hot surfaces.\u003c\/li\u003e\n\u003cli\u003eDo not allow excess Polytrol to dry and create a film on the surface (always remove excess product).\u003c\/li\u003e\n\u003cli\u003eDo not use Polytrol on white surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e \u003c\/div\u003e","brand":"Owatrol","offers":[{"title":"250ml aerosol","offer_id":31447771381892,"sku":"GK0612CLE0025","price":15.44,"currency_code":"GBP","in_stock":true},{"title":"500ml","offer_id":31447771283588,"sku":"GK0612CLE0050","price":16.42,"currency_code":"GBP","in_stock":true},{"title":"1 Litre","offer_id":31447771316356,"sku":"GK0612CLE0100","price":25.35,"currency_code":"GBP","in_stock":true},{"title":"20 Litre","offer_id":31447771349124,"sku":"GK0612CLE2000","price":344.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Polytrol_1L_with_250ml_Spray.png?v=1614608156"},{"product_id":"owatrol-deks-olje-d1","title":"Owatrol Deks Olje D1","description":"\u003cp\u003eDeks Olje D1 is a saturating wood oil which feeds the wood to replace lost oils. It drives out any moisture and air present in the wood and fills the pores with oil. This enriches and stabilises the wood to provide long-lasting protection to both interior and exterior timber. It does not form a film on the surface of the wood but protects from within so it will not peel or crack. Deks Olje D1 is a clear oil which gives a clear matt finish enhancing the natural beauty of the wood and it is easy to maintain with no sanding or stripping.\u003c\/p\u003e\r\n\u003cp\u003eDeks Olje D1 has been optimised for dense, oily and difficult to impregnate woods and can be used on horizontal and vertical surfaces. It provides protection against humidity and its effects as well as against damage from UV rays. If applied in marine environments it can be applied both above and below the waterline. It can also be used as a primer for conventional singles pack coatings and decorative finishes. For an intense high gloss finish topcoat with Deks Olje D1 with \u003ca title=\"High gloss wood varnish\" href=\"https:\/\/www.owatroldirect.co.uk\/product\/deks-olje-d2\/\" rel=\"nofollow\"\u003eDeks Olje D2\u003c\/a\u003e.\u003c\/p\u003e\r\n\u003ch2\u003eIdeal Uses for Deks Olje D1 saturating wood oil\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003ePreserving your parquet flooring\u003c\/li\u003e\r\n\u003cli\u003eProtecting your outdoor garden furniture\u003c\/li\u003e\r\n\u003cli\u003eTreating your boat hull\u003c\/li\u003e\r\n\u003cli\u003eProtecting your timber decking\u003c\/li\u003e\r\n\u003cli\u003eReviving your door and window frames\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e","brand":"Owatrol","offers":[{"title":"1 Litre","offer_id":31447772397700,"sku":"GK0293CLE0100","price":27.35,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre","offer_id":31447772430468,"sku":"GK0293CLE0250","price":65.35,"currency_code":"GBP","in_stock":true},{"title":"10 Litre","offer_id":42752356024563,"sku":"GK0293CLE01000","price":492.69,"currency_code":"GBP","in_stock":false},{"title":"20 Litre","offer_id":31447772463236,"sku":"GK0293CLE2000","price":439.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/deks-olje-d1-en_5.jpg?v=1576905368"},{"product_id":"owatrol-deks-olje-d2","title":"Owatrol Deks Olje D2","description":"\u003cp\u003eDeks Olje D2 is a varnish-like, tough, flexible and durable finish that enhances the natural beauty of both interior and extrerior wood. It forms a highly flexible film which moves with the wood to prevent peeling and flaking. Deks Olje D2 is easy to apply and to maintain and the more coats you apply the more high gloss the finish will be. No sanding is required between coats and maintenance and repair can also be carried out without stripping!\u003c\/p\u003e\n\u003cp\u003eBefore using Deks Olje D2, all wood surfaces should be treated and protected with \u003ca rel=\"nofollow\" href=\"https:\/\/www.owatroldirect.co.uk\/product\/deks-olje-d1\/\" title=\"D1 saturating wood oil\"\u003eDeks Olje D1 saturating wood oil\u003c\/a\u003e. Unlike traditional varnishes, Deks Olje D2 will not craze or blister and because of Deks Olje D1’s penetrating qualities it will not peel or flake as water is unable to get in to the wood. On boats, D2 can be used for all applications above the waterline but please note that due to the high gloss finish it is not suitable for surfaces which will be walked on as it would be very slippery.\u003c\/p\u003e\n\u003ch2\u003eIdeal Uses for Deks Olje D2 High gloss oil\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGiving an elegant and sophisticated look to wood panelling\u003c\/li\u003e\n\u003cli\u003eFinishing accents on your boat like handrails, wheel housings and trims\u003c\/li\u003e\n\u003cli\u003ePerfecting window and door frames\u003c\/li\u003e\n\u003cli\u003eVarnishing vertical or horizontal surfaces\u003c\/li\u003e\n\u003cli\u003eDecorating wooden furniture both inside and out\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e \u003c\/div\u003e","brand":"Owatrol","offers":[{"title":"1 Litre","offer_id":31447772692612,"sku":"GK0270CLE0100","price":32.35,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre","offer_id":31447772725380,"sku":"GK0270CLE0250","price":75.35,"currency_code":"GBP","in_stock":true},{"title":"10 Litre","offer_id":42752356647155,"sku":"GK0270CLE0100","price":577.95,"currency_code":"GBP","in_stock":true},{"title":"20 Litre","offer_id":31447772758148,"sku":"GK0270CLE2000","price":515.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/deks-olje-d2-en_5.jpg?v=1576905372"},{"product_id":"owatrol-dilunett-gel","title":"Owatrol Dilunett Gel","description":"\u003cp\u003eDilunett is a solvent and paraffin free paint stripper that will remove any oil and alkyd based paint, varnish or woodstain. Dilunett’s powerful formula strips up to 8 coats of finish in just one application. Suitable for almost any surface such as wood, metal and plastic, Dilunett’s gel consistency means it will not run, making it ideal for us on vertical surfaces, elaborate plaster or wood designs that are in need of being stripped.\u003c\/p\u003e\r\n\u003cp\u003eEasy to apply, Dilunett dissolves paint in even the smallest of recesses and the finest of details, softening all the layers for a simple and clean removal.\u003cbr\u003eBiodegradable and non flammable, Dilunett is even safe to use in poorly ventilated or confined areas.\u003c\/p\u003e\r\n\u003ch2\u003eIdeal uses for Dilunett\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCan be used on most surfaces; on wood (some woods such as Oak and Chestnut require more attention before using Dilunett), metal (except Aluminum), plastic, stone, cement etc\u003c\/li\u003e\r\n\u003cli\u003eIdeal for surfaces difficult to strip due to size or intricate design and horizontal and vertical surfaces.\u003c\/li\u003e\r\n\u003cli\u003eSolvent free so no toxic fumes.\u003c\/li\u003e\r\n\u003cli\u003eDilunett is capable of removing up to 8 coats of finish in 1 application.\u003c\/li\u003e\r\n\u003cli\u003eIdeal for stripping large areas as Dilunett is non-flammable, does not dry out and remains active a long time.\u003c\/li\u003e\r\n\u003cli\u003eDoes not attack plastics, rubber, synthetic coating or gel coats (GRP).\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Owatrol","offers":[{"title":"1 Litre","offer_id":31447777935492,"sku":"GK0001CLE0100","price":19.55,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre","offer_id":31447777968260,"sku":"GK0001CLE0250","price":40.35,"currency_code":"GBP","in_stock":true},{"title":"10 Litre","offer_id":31447778001028,"sku":"GK0001CLE010","price":140.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Dilunett_1L.png?v=1614608403"},{"product_id":"owatrol-aquadecks","title":"Owatrol Aquadecks","description":"\u003cp\u003eOwatrol’s Aquadecks is a penetrating water based wood finish that leaves a long lasting, rich, matt finish for all woods, including exotic hardwoods.\u003cbr\u003eFor easy application, Aquadecks is ready to use, dries quickly and has a low odour.\u003c\/p\u003e\n\u003cp\u003eBecause it saturates and stabilises the wood, Aquadecks has minimal cracking, warping and other damage caused by UV rays and moisture.\u003c\/p\u003e\n\u003cp\u003eDue to Aquadecks being non-film forming (no peeling or flaking) this makes it easy to maintain without the need for sanding and stripping.\u003cbr\u003eFor interior or exterior use, Aquadecks works perfectly on horizontal and vertical surfaces; such as decks, outdoor furniture or cladding and can be applied directly onto new or weathered wood.\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for Aquadecks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFor exterior or interior wood.\u003c\/li\u003e\n\u003cli\u003eCan be used on hardwoods such as: including Ipé, Ironwood, Mahogany and Teak.\u003c\/li\u003e\n\u003cli\u003eCan be used on softwoods such as: Pine, Spruce, Cedar, Pressure treated woods etc.\u003c\/li\u003e\n\u003cli\u003ePerfect for decking, garden furniture, cladding, fences etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface preparation\u003c\/h2\u003e\n\u003cp\u003eSurfaces must be thoroughly clean, dry and free of dirt, grease, grime, mildew and previous coatings.\u003cbr\u003eTreat mildew with a 50\/50 bleach\/water solution. Scrub solution on to surface and allow to stand for 10-15 minutes; rinse thoroughly.\u003cbr\u003eAfter stripping and cleaning, allow the wood to dry 2-3 good drying days or until it has reached a moisture content of 18% or less before applying the finish.\u003cbr\u003eAquadecks can only be applied to bare wood surfaces or a weathered wood surface that was previously finished with Aquadecks.\u003cbr\u003eALL other finishes MUST be completely and thoroughly removed.\u003cbr\u003eIf necessary sand surface after stripping and cleaning (80 grit paper).\u003c\/p\u003e\n\u003ch3\u003eFor application onto new wood surfaces\u003c\/h3\u003e\n\u003cp\u003eNew wood surfaces have a hard shiny surface called mill glaze that prevents maximum penetration and bonding of any finish; this should be removed prior to application in order to ensure maximum performance of the finish.\u003cbr\u003eTreat the surface with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tradepaintdirect.co.uk\/products\/owatrol-aquanett\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAquanett\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand then neutralise with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tradepaintdirect.co.uk\/products\/owatrol-net-trol-nettrol\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eNet-Trol\u003c\/a\u003e. Alternatively, mechanically or manually abrade surface with 80 grit paper.\u003cbr\u003eClean off all loose wood particles.\u003cbr\u003eTest wood for absorbency by sprinkling water on the surface. If water is absorbed rapidly, the surface is ready for finishing.\u003c\/p\u003e\n\u003ch3\u003eFor application onto untreated weathered woods\u003c\/h3\u003e\n\u003cp\u003eUntreated wood surfaces that have weathered longer than 6 months should be thoroughly cleaned with undiluted\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tradepaintdirect.co.uk\/products\/owatrol-net-trol-nettrol\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eNet-Trol\u003c\/a\u003e to ensure that all loose wood fibres, dirt and other surface contaminants are removed.\u003c\/p\u003e\n\u003ch3\u003eFor application onto previously treated surfaces (oiled)\u003c\/h3\u003e\n\u003cp\u003eAll oils or sealers must be completely and thoroughly removed with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tradepaintdirect.co.uk\/products\/owatrol-aquanett\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAquanett\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand the stripped surface neutralised with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tradepaintdirect.co.uk\/products\/owatrol-net-trol-nettrol\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eNet-Trol\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ebefore applying Aquadecks.\u003c\/p\u003e\n\u003ch3\u003eFor application onto previously treated surfaces (paint, stain, varnish, waterproofers etc)\u003c\/h3\u003e\n\u003cp\u003eAll previous coatings must be completely and thoroughly removed with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tradepaintdirect.co.uk\/products\/owatrol-dilunett-gel\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDilunett\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand the stripped surface neutralised with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tradepaintdirect.co.uk\/products\/owatrol-net-trol-nettrol\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eNet-trol\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ebefore applying Aquadecks.\u003c\/p\u003e\n\u003cp\u003eNote: Hardwoods including exotic hardwoods and woods rich in tannins i.e. Cedar, Douglas Fir, Teak, Ipe etc may darken\u003cbr\u003ewith\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tradepaintdirect.co.uk\/products\/owatrol-aquanett\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAquanett\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tradepaintdirect.co.uk\/products\/owatrol-dilunett-gel\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDilunett\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ebut neutralising with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tradepaintdirect.co.uk\/products\/owatrol-net-trol-nettrol\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eNet-Trol\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eimmediately after rinsing will lighten and restore the woods colour.\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eApply 2 even applications of Aquadecks ‘wet on wet’.\u003cbr\u003eApply a 1st liberal application of Aquadecks and allow to penetrate into the wood.\u003cbr\u003eApply 2nd application as soon as the wet look of the 1st application has disappeared (normally 15- 20 minutes) and allow to penetrate into the wood.\u003cbr\u003eFor very porous surfaces a 3rd application may be needed.\u003cbr\u003eBrush out any puddles within 20 minutes of applying the last application to avoid aquadecks drying as shiny spots on the surface.\u003cbr\u003eDo not allow Aquadecks to become Touch Dry or Dry between applications.\u003cbr\u003eAquadeck’s place is in the wood not on the surface. Do not create a film on the surface, as this will affect the coatings performance.\u003c\/p\u003e\n\u003ch2\u003eMaintenance\u003c\/h2\u003e\n\u003ch3\u003eGeneral directions\u003c\/h3\u003e\n\u003cp\u003eMaintenance is due when the treated wood takes on a weathered grey look or has severely faded.\u003cbr\u003eClean surface including severely faded or weathered areas that have turned grey with undiluted Net-Trol before applying a maintenance application of Aquadecks.\u003cbr\u003eSurfaces with harsh exposures to the sun, weather or foot traffic will show wear more quickly than other areas.\u003cbr\u003eIn these cases, clean affected areas with undiluted Net-Trol and re-apply Aquadecks as directed under “Application” instructions above, blending into areas which still have good colour.\u003cbr\u003eFor very porous or badly weathered surfaces a 2nd application may be required; this should be applied as directed under “Application” instructions above.\u003cbr\u003eAreas retaining good colour do not need re-treating.\u003c\/p\u003e\n\u003ch3\u003eDecks and other horizontal surfaces\u003c\/h3\u003e\n\u003cp\u003eMost decks and horizontal surfaces do not need re-treating every year.\u003cbr\u003eA single application of Aquadeks every second year will be sufficient to refresh the natural beauty of the deck\/horizontal surface and maintain protection. Cleaning with Net-Trol once a year between treatments to remove dirt and contamination will renew the appearance of the wood.\u003cbr\u003eFor general re-treating follow directions under “Surface Preparation” and “Application”.\u003c\/p\u003e\n\u003ch3\u003eCladding and other vertical surfaces\u003c\/h3\u003e\n\u003cp\u003eCladding and vertical surfaces do not require annual maintenance.\u003cbr\u003eWhen Aquadecks shows signs of wear and weathering (turning grey) then a maintenance application is required.\u003cbr\u003eClean surface with undiluted Net-Trol and re-treat with a single application of Aquadecks according to “Application” instructions above, to replace material that has weathered out.\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eDue to Aquadecks being a water-based product, you only need soap and water to clean up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e: Woods high in tannins e.g., Cedar, Ipe, Oak, Teak will darken when treated with Aquanett, Prepdeck or\u003cbr\u003eDilunett. Neutralising with Net-Trol immediately after rinsing will lighten and restore the woods colour.\u003c\/p\u003e\n\u003cp\u003eIt is imperative that a contact time test is done when using Aquanett, Prepdeck or Dilunett on Oak, Chestnut and other high tannin content woods to avoid blackening the wood – Refer to the relevant TDS.\u003c\/p\u003e\n\u003ch2\u003eThings to Remember\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse as is, do not thin.\u003c\/li\u003e\n\u003cli\u003eMix thoroughly before and periodically during application.\u003c\/li\u003e\n\u003cli\u003eFor colour uniformity, mix all product together that is to be applied to anyone area or section.\u003c\/li\u003e\n\u003cli\u003eCover everything you do not wish to coat, including plants and shrubs.\u003c\/li\u003e\n\u003cli\u003eApply between 10°C and 30°C.\u003c\/li\u003e\n\u003cli\u003eDo not apply if cold and\/or wet weather is expected within 12 hours.\u003c\/li\u003e\n\u003cli\u003eAlways work the entire length of a deck board or horizontal siding to a logical break, such as a window or door frame or end of a deck board.\u003c\/li\u003e\n\u003cli\u003eVertical siding should be coated from top to bottom.\u003c\/li\u003e\n\u003cli\u003eNever stop application in the middle of the board or wall.\u003c\/li\u003e\n\u003cli\u003eNever apply in direct sunlight or to hot surfaces.\u003c\/li\u003e\n\u003cli\u003eDo not allow to dry between coats – apply Aquadecks ‘wet on wet’.\u003c\/li\u003e\n\u003cli\u003eAfter spray application, always back-brush or back-roll to improve penetration and uniformity of coverage\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"100ml Sample \/ Natural (Movingui)","offer_id":42883895165171,"sku":"GK0003NAT0010","price":7.35,"currency_code":"GBP","in_stock":true},{"title":"100ml Sample \/ Honey","offer_id":42883895197939,"sku":"GK0003HON0010","price":7.35,"currency_code":"GBP","in_stock":true},{"title":"100ml Sample \/ Old Wood Grey","offer_id":42883895230707,"sku":"GK0003GRE0010","price":7.35,"currency_code":"GBP","in_stock":true},{"title":"100ml Sample \/ Ebony","offer_id":42883895263475,"sku":"GK0003EBY0010","price":7.35,"currency_code":"GBP","in_stock":true},{"title":"100ml Sample \/ Graphite Grey","offer_id":42883895296243,"sku":"GK0003GRA0010","price":7.35,"currency_code":"GBP","in_stock":true},{"title":"100ml Sample \/ Teak","offer_id":43902900207859,"sku":"GK0003TEA0010","price":7.35,"currency_code":"GBP","in_stock":true},{"title":"1 Litre \/ Natural (Movingui)","offer_id":31447778984068,"sku":"GK0003NAT0100","price":33.35,"currency_code":"GBP","in_stock":true},{"title":"1 Litre \/ Honey","offer_id":31447779082372,"sku":"GK0003HON0100","price":33.35,"currency_code":"GBP","in_stock":true},{"title":"1 Litre \/ Old Wood Grey","offer_id":34844938731688,"sku":"GK0003GRE0100","price":33.35,"currency_code":"GBP","in_stock":true},{"title":"1 Litre \/ Ebony","offer_id":34844942532776,"sku":"GK0003EBY0100","price":33.35,"currency_code":"GBP","in_stock":true},{"title":"1 Litre \/ Graphite Grey","offer_id":34844945186984,"sku":"GK0003GRA0100","price":33.35,"currency_code":"GBP","in_stock":true},{"title":"1 Litre \/ Teak","offer_id":43902900240627,"sku":"GK0003TEA0100","price":33.35,"currency_code":"GBP","in_stock":true},{"title":"5 Litre \/ Natural (Movingui)","offer_id":31447779377284,"sku":"GK0003NAT0500","price":120.35,"currency_code":"GBP","in_stock":true},{"title":"5 Litre \/ Honey","offer_id":34844925984936,"sku":"GK0003HON0500","price":120.35,"currency_code":"GBP","in_stock":true},{"title":"5 Litre \/ Old Wood Grey","offer_id":34844938764456,"sku":"GK0003GRE0500","price":120.35,"currency_code":"GBP","in_stock":true},{"title":"5 Litre \/ Ebony","offer_id":34844942794920,"sku":"GK0003EBY0500","price":120.35,"currency_code":"GBP","in_stock":true},{"title":"5 Litre \/ Graphite Grey","offer_id":34844945219752,"sku":"GK0003GRA0500","price":120.35,"currency_code":"GBP","in_stock":true},{"title":"5 Litre \/ Teak","offer_id":43902900273395,"sku":"GK0003TEA0500","price":120.35,"currency_code":"GBP","in_stock":true},{"title":"20 Litre \/ Natural (Movingui)","offer_id":31447779410052,"sku":"GK0003NAT2000","price":444.35,"currency_code":"GBP","in_stock":true},{"title":"20 Litre \/ Honey","offer_id":34845000532136,"sku":"GK0003HON2000","price":444.35,"currency_code":"GBP","in_stock":true},{"title":"20 Litre \/ Old Wood Grey","offer_id":34858847633576,"sku":"GK0003GRE2000","price":444.35,"currency_code":"GBP","in_stock":true},{"title":"20 Litre \/ Ebony","offer_id":34858850255016,"sku":"GK0003EBY2000","price":444.35,"currency_code":"GBP","in_stock":true},{"title":"20 Litre \/ Graphite Grey","offer_id":34858855268520,"sku":"GK0003GRA2000","price":444.35,"currency_code":"GBP","in_stock":true},{"title":"20 Litre \/ Teak","offer_id":43902900306163,"sku":"GK0003TEA2000","price":444.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Aquadecks_5L.png?v=1614608282"},{"product_id":"owatrol-oil","title":"Owatrol Oil","description":"\u003cp\u003eWhen added as a paint conditioner to any oil or alkyd based coatings and it will give increased wet edge time, improved flow ability, greater adhesion and unlike damaging thinners, will maintain the inherent quality of the paint without affecting its appearance or drying times allowing you to achieve a more professional finish.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv class=\"hpy-product-info\"\u003e\n\u003cdiv class=\"hpy-info\"\u003e \u003c\/div\u003e\n\u003cdiv class=\"hpy-product-info-container\"\u003e\n\u003cp\u003eNEW! Owatrol Oil is now available in a handy and easy-to-use \u003cstrong\u003e300ml spray can\u003c\/strong\u003emaking it even easier to apply, especially to those hard to reach places!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3\u003eUsing Owatrol Oil as a rust inhibitor\u003c\/h3\u003e\n\u003cp\u003eOwatrol Oil penetrates through the rusted metal to the sound metal below, isolating it and protecting it from further rusting. As it is a penetrating oil it can be used directly on the rusted surfaces – it drives out moisture and air and stabilises the metal to protect it from future damage.\u003c\/p\u003e\n\u003cp\u003eOn brand new metal surfaces, use \u003ca href=\"https:\/\/www.tradepaintdirect.co.uk\/products\/owatrol-ap60?variant=31447831314564\" target=\"_blank\" title=\"AP 60\" rel=\"noopener noreferrer\"\u003eOwatrol’s AP 60\u003c\/a\u003e instead. If you are looking for a high gloss rusted finish you can also overcoat the surface with \u003ca href=\"https:\/\/www.tradepaintdirect.co.uk\/products\/owatrol-deks-olje-d2\" target=\"_blank\" title=\"Deks Olje D2\" rel=\"noopener noreferrer\"\u003eDeks Olje D2 high gloss clear oil\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eUsing Owatrol Oil to aid adhesion\u003c\/h3\u003e\n\u003cp\u003eOwatrol Oil leaves a bonding film on all surfaces it is used on which maintains the natural look of the surface but allows enhanced adhesion, making it perfect as a foundation for primers or finishing coats. It gives excellent adhesion including on galvanised steel, aluminium, zinc, wood and more. It allows paint to be applied directly to firm rust and is heat resistant up to +175°C.\u003c\/p\u003e\n\u003ch3\u003eUsing Owatrol Oil as a paint conditioner\u003c\/h3\u003e\n\u003cp\u003eOwatrol Oil can be mixed into oil-based paints as a paint conditioner when several great benefits. Firstly, it gives the paint rust inhibiting properties and helps prevent rust on painted surfaces – even when rust is already present. It also improves the flow and workability of the paint, maintaining the ‘wet edge’ for longer and reducing brush and roller marks. Finally, it also gives the paint a better viscosity which allows painting work to be carried out in more extreme cold, heat and windy conditions. Unlike damaging paint thinners it does all this without altering the inherent qualities or the finish of the paint.\u003c\/p\u003e\n\u003cp\u003ePlease note that if you are looking for a product to give this effect but for water-based paints then please use \u003ca href=\"https:\/\/www.tradepaintdirect.co.uk\/products\/owatrol-floetrol-paint-conditioner-for-emulsions\" target=\"_blank\" title=\"Floetrol water-based paint conditioner\" rel=\"noopener noreferrer\"\u003eFloetrol\u003c\/a\u003e instead as it is designed for use in any water-based paint whereas Owatrol Oil is for use in oil-based paints.\u003c\/p\u003e\n\u003ch3\u003eUsing Owatrol Oil for wood impregnation\u003c\/h3\u003e\n\u003cp\u003eWhen used on wood surfaces Owatrol Oil saturates the wood and protects it from damage caused by moisture. It also helps to prevent paint from peeling and protects metal parts such as hinges and latches from corrosion.\u003c\/p\u003e\n\u003ch2\u003eIdeal Uses for Owatrol Oil\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePriming galvanised surfaces with no need for weathering or pickling\u003c\/li\u003e\n\u003cli\u003ePreventing further damage in heavily rusted surfaces\u003c\/li\u003e\n\u003cli\u003eImproving paint flow when working in cold environments\u003c\/li\u003e\n\u003cli\u003ePreventing peeling paint on wood surfaces\u003c\/li\u003e\n\u003cli\u003eProtecting metal part on wood surfaces like gates and window frames\u003c\/li\u003e\n\u003cli\u003eAssuring better adhesion of finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eApplication tools\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBrush\u003c\/li\u003e\n\u003cli\u003eRoller\u003c\/li\u003e\n\u003cli\u003eAirless or HVLP sprayer\u003c\/li\u003e\n\u003cli\u003eGarden sprayer, pump sprayer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003ch3\u003eSurface preparation when using Owatrol Oil as a rust inhibitor\u003c\/h3\u003e\n\u003cp\u003eFirst, surfaces must be clean, dry and free from oil, grease and other surface contaminants. Remove all scale; loose and flaking rust and old paint back to a sound surface and edge and feather in any sharp edges. Surfaces exposed to chemicals (acids, alkalis or salt deposits) should be washed using copious amounts of water or steam cleaned. Severely contaminated surfaces should be cleaned using an appropriate solvent.\u003c\/p\u003e\n\u003cp\u003eDo not remove firm rust or clean the metal back to a bright finish.\u003c\/p\u003e\n\u003ch3\u003eSurface preparation when using Owatrol Oil as a paint conditioner\u003c\/h3\u003e\n\u003cp\u003eFirst prepare the surface as per the instructions on your paint can. In addition, if not asked to ensure that you remove all loose and flaking material and treat any organic growth with fungicidal solution or a mix of 1 part water to 1 part chlorine bleach (allow bleach solution to sit for 15 minutes), rinse thoroughly and allow to dry.\u003c\/p\u003e\n\u003ch2\u003eApplying Owatrol Oil as a Rust Inhibitor\u003c\/h2\u003e\n\u003ch3\u003eUsing Owatrol Oil on new clean steel\u003c\/h3\u003e\n\u003cp\u003eFirst prime new steel with a mix of 1 part Owatrol Oil to 3 parts primer. Then follow with normal paint system adding Owatrol Oil to subsequent coats as directed under ‘Mixing instructions’ below.\u003c\/p\u003e\n\u003ch3\u003eUsing Owatrol Oil on lightly rusted surfaces\u003c\/h3\u003e\n\u003cp\u003eFirst prime the surface with a mix of 1 part Owatrol Oil to 2 parts primer. Then follow with normal paint system adding Owatrol Oil to subsequent coats as directed under ‘Mixing instructions’ below.\u003c\/p\u003e\n\u003ch3\u003eUsing Owatrol Oil on new unpainted rusty steel\u003c\/h3\u003e\n\u003cp\u003eFirst prime the surface with a mix of 1 part Owatrol Oil to 1 part Primer. Then follow with normal paint system adding Owatrol Oil to subsequent coats as directed under ‘Mixing instructions’ below.\u003c\/p\u003e\n\u003ch3\u003eUsing Owatrol Oil on old, severely rusted or previously coated surfaces\u003c\/h3\u003e\n\u003cp\u003eFirst, apply wet on wet applications of Owatrol Oil to all exposed rust until fully saturated and allow it to dry. Saturation is indicated by a uniform glossy appearance to the surface when Owatrol Oil is dry. Before Owatrol Oil has hardened, check the surfaces and remove rust scale and old paint loosened by the above. If needed, touch up these areas. Allow to dry. Next, apply a mix of 1 part Owatrol Oil to 2 parts primer and allow to dry. Then follow with normal paint system adding Owatrol Oil to subsequent coats as directed under ‘Mixing instructions’ below.\u003c\/p\u003e\n\u003cp\u003eNote: Owatrol Oil will not lift well-bonded paint.\u003c\/p\u003e\n\u003ch2\u003eApplying Owatrol Oil as a Paint Conditioner\u003c\/h2\u003e\n\u003cp\u003eFirst apply paint in normal the manner. If the paint is sticky, drags, sets up to fast or does not level properly add Owatrol Oil (stirring in well) until the paint works smoothly, easily and evenly. Allow the brush, roller or sprayer to be your guide.\u003c\/p\u003e\n\u003ch3\u003eUsing Owatrol Oil as a Paint Conditioner for wood surfaces in sound condition\u003c\/h3\u003e\n\u003cp\u003eFirst prime any bare wood with a mix of 1 part Owatrol Oil to 2 parts primer and allow to dry. Follow with normal paint system adding Owatrol Oil as in ‘Mixing Instructions’ below.\u003c\/p\u003e\n\u003ch3\u003eUsing Owatrol Oil as a Paint Conditioner on damaged, soft or punky wood surfaces\u003c\/h3\u003e\n\u003cp\u003eFirst apply 2 to 4 liberal applications of Owatrol Oil wet on wet, as fast as the wood will absorb it. Do not allow Owatrol Oil to dry between applications. When the wood cannot absorb any more wipe up any excess and allow to dry overnight (12 hrs). Follow with normal paint system adding Owatrol Oil as in ‘Mixing Instructions’ below to ease application and aid adhesion.\u003c\/p\u003e\n\u003ch2\u003eMixing instructions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTopcoat:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eAs required – normally 5 %-20 % by volume.\u003cbr\u003eUndercoat: up to 30 % by volume.\u003cbr\u003ePrimer: up to 50 % by volume.\u003c\/p\u003e\n\u003cp\u003eThe above is meant as a guide only. Conditions of application, porosity of surface etc. will dictate the amount of Owatrol Oil to be mixed into the paint.\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eClean all tools and equipment with white spirits while still wet. If allowed to dry, remove with paint stripper. Store and maintain equipment as directed by the manufacturer.\u003c\/p\u003e\n\u003cp\u003eNOTE: Any rags, steel wool etc soaked in Owatrol Oil may spontaneously catch fire if improperly discarded. Rags, steel wool etc must be saturated with water after use or placed in a sealed, water-filled metal container, before disposing with household waste.\u003c\/p\u003e\n\u003ch2\u003eRestrictions\u003c\/h2\u003e\n\u003cp\u003eDo not mix or overcoat Owatrol Oil with paints containing hot solvents i.e. Xylene, 2 part coatings, chlorinated rubber etc. – for these type of paints use\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tradepaintdirect.co.uk\/products\/owatrol-cip-corrosion-inhibiting-primer\" target=\"_blank\" title=\"CIP Corrosive Inhibiting Primer\" rel=\"noopener noreferrer\"\u003eOwatrol CIP\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003einstead. Do not use Owatrol Oil as a paint conditioner in water-based paints, for this purpose use\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.tradepaintdirect.co.uk\/products\/owatrol-floetrol-paint-conditioner-for-emulsions\" target=\"_blank\" title=\"Floetrol paint conditioner\" rel=\"noopener noreferrer\"\u003eFloetrol\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003einstead – Owatrol’s water-based paint conditioner.\u003c\/p\u003e\n\u003ch2\u003eThings to Remember\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover everything you do not wish to paint.\u003c\/li\u003e\n\u003cli\u003eApply between + 5°C and + 35°C.\u003c\/li\u003e\n\u003cli\u003eDo not apply in direct sunlight or on to hot surfaces.\u003c\/li\u003e\n\u003cli\u003eTest for compatibility when adding Owatrol Oil to paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Owatrol","offers":[{"title":"300 ml Spray Can","offer_id":31447780065412,"sku":"GK00040030CLE","price":14.65,"currency_code":"GBP","in_stock":true},{"title":"500ml","offer_id":31447779934340,"sku":"GK0004CLE0050","price":15.35,"currency_code":"GBP","in_stock":true},{"title":"1 Litre","offer_id":31447779967108,"sku":"GK0004CLE0100","price":25.25,"currency_code":"GBP","in_stock":true},{"title":"5 Litre","offer_id":31447779999876,"sku":"GK0004CLE0500","price":107.35,"currency_code":"GBP","in_stock":true},{"title":"20 Litre","offer_id":31447780032644,"sku":"GK0004CLE2000","price":409.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/owatrol-oil-packaging.png?v=1576905430"},{"product_id":"owatrol-ra-85-aluminium-paint-ra85","title":"Owatrol RA.85 Aluminium paint RA85","description":"\u003cp\u003eRA.85 Aluminium Paint is a flexible, anti corrosive coating that holds the deep penetrating and adhesion properties of \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/owatrol-oil\/\"\u003eOwatrol Oil\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRA.85 will restore even rusted and corroded surfaces to an acceptable appearance and give lasting protection while greatly prolong the life of the surface.\u003c\/p\u003e\n\u003cp\u003ePerfect for interior or exterior use, RA.85 can be used on things such as grates, fences, roofing, pipes, machinery, plumbing etc and can be applied to both horizontal and vertical surfaces.\u003c\/p\u003e\n\u003cp\u003eRA.85 has excellent abrasion resistance, withstands chemical attack and is ideal in aggressive climatic conditions where a high resistant finish is necessary.\u003c\/p\u003e\n\u003cp\u003eRA.85 was originally developed for use in the shipping industry and quickly became a favorite cargo hold coating.\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for RA.85 Aluminium Paint\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAnti corrosive aluminium finish with intense high gloss look.\u003c\/li\u003e\n\u003cli\u003eExcellent penetrating and adhesion properties due to the binding properties of \u003ca title=\"Owatrol Oil\" href=\"https:\/\/www.owatroldirect.co.uk\/product\/owatrol-oil\/\" rel=\"nofollow\"\u003eOwatrol Oil\u003c\/a\u003e – Does not peel or flake.\u003c\/li\u003e\n\u003cli\u003ePerfect for rejuvenating rusted surfaces.\u003c\/li\u003e\n\u003cli\u003eIdeal for aggressive climatic conditions. Withstands chemical attacks.\u003c\/li\u003e\n\u003cli\u003eVery good film-forming qualities (adhesion, flexibility, even film).\u003c\/li\u003e\n\u003cli\u003eHigh temperature resistance up to +175 °C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Owatrol","offers":[{"title":"0.75 Litre","offer_id":42752462127347,"sku":"GK0224ALU0250","price":31.61,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre","offer_id":31447780458628,"sku":"GK0224ALU0250","price":92.34,"currency_code":"GBP","in_stock":true},{"title":"20 Litre","offer_id":31447780491396,"sku":"GK0224ALU2000","price":553.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/RA85_Aluminium_Paint.png?v=1644501662"},{"product_id":"owatrol-cip-corrosion-inhibiting-primer","title":"Owatrol CIP Corrosion Inhibiting Primer","description":"\u003cp\u003eCIP (Corrosive Inhibiting Primer) is a rust inhibiting primer which is suitable for finishing with both single and 2-pack paints and finishes. It contains the anti-corrosive properties of \u003ca title=\"Anti-Corrosive oil\" href=\"https:\/\/www.owatroldirect.co.uk\/product\/owatrol-oil\/\" rel=\"nofollow\"\u003eOwatrol Oil \u003c\/a\u003e which enables it to stabilise the surface by penetrating deep into the substrate, driving out excess moisture and air to form a solid stable layer.\u003c\/p\u003e\n\u003cp\u003eCIP is easy to use and does not require sand or shot blasting first. It can be used on both new and rusted surfaces – both interior and exterior and is fine for use on horizontal and vertical surfaces. It will not dissolve or break down when even high solvent paints and finishes (urethane, epoxy, chlorinated rubber, synthetic, etc.) are applied to it and the pigmentation provides enhanced protection and perfect film-forming qualities. With Owatrol’s CIP, sand or shot-blasted surfaces do not require immediate priming as a light rust coating will not affect its performance or the final result.\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for CIP rust inhibiting primer\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOutstanding for high performance in severe conditions such as marine or tropical environments\u003c\/li\u003e\n\u003cli\u003eResisting corrosive fumes\u003c\/li\u003e\n\u003cli\u003eProtecting motor vehicles\u003c\/li\u003e\n\u003cli\u003eAvoiding rusting on construction equipment\u003c\/li\u003e\n\u003cli\u003eProtecting ballast tanks of ships\u003c\/li\u003e\n\u003cli\u003eInhibiting rust development on every day items such as railings and gates\u003c\/li\u003e\n\u003cli\u003ePerfect protection where a high resistant paint or two-pack finish is necessary\u003c\/li\u003e\n\u003cli\u003ePriming steel superstructures\u003c\/li\u003e\n\u003cli\u003eOutstanding adherance on clean bright steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Owatrol","offers":[{"title":"0.75 litre","offer_id":31447780819076,"sku":"GK0101RED0075","price":31.68,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre","offer_id":31447780851844,"sku":"GK0101RED0250","price":94.49,"currency_code":"GBP","in_stock":true},{"title":"20 Litre","offer_id":42752437354739,"sku":"GK0101RED0250","price":682.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/CIP.png?v=1644501514"},{"product_id":"owatrol-marine-strip","title":"Owatrol Marine Strip","description":"\u003cp\u003eMarine Strip is a powerful water-soluble paint and anti-fouling stripper designed for marine uses which can remove up to 8 coats in just one application. It is perfect for use on boat gelcoats as it’s gel consistency means no drips, even on vertical surfaces. It is safe to use on virtually any surfaces including wood, plastic, metal and GRP and it makes stripping even intricate detailing a doddle!\u003c\/p\u003e\r\n\u003cp\u003eAs it’s water-soluble, Marine Strip can simply be rinsed away with water using a pressure washer and it has an active working time of up to 12 hours meaning it doesn’t require constant supervision and immediate removal as some products do. It is VOC free and non flammable, so Marine Strip is safe to use in poorly ventilated or confined areas. Marine Strip is not effective on 2 component, baked-on paints or polyurethane paint and varnish. Marine Strip is a must-have for all boat owners, a powerful but easy to use paint stripper for almost any surface on your boat.\u003c\/p\u003e\r\n\u003ch2\u003eIdeal Uses for Marine Paint Stripper\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eReviving the gelcoat on your boat\u003c\/li\u003e\r\n\u003cli\u003eStripping peeling paint or varnish from handrails\u003c\/li\u003e\r\n\u003cli\u003eRemoving wood stain from boat decks\u003c\/li\u003e\r\n\u003cli\u003eStripping old paint from metal fixtures\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv class=\"hpy-product-info\"\u003e\r\n\u003cdiv class=\"hpy-info\"\u003e \u003c\/div\u003e\r\n\u003cdiv class=\"hpy-product-info-container\"\u003e\r\n\u003ch2\u003eRestrictions\u003c\/h2\u003e\r\n\u003cp\u003eMarine Strip will not remove 2-pack paints, for this use \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/dsp-800-multi-purpose-stripper\/\" rel=\"nofollow\"\u003eDSP 800\u003c\/a\u003e (except on GRP and plastics).\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\u003c\/div\u003e\r\n\u003cp\u003e \u003c\/p\u003e","brand":"Owatrol","offers":[{"title":"1 Litre","offer_id":31447781441668,"sku":"GK08531CLE0100","price":17.59,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre","offer_id":31447781507204,"sku":"GK0853CLE025","price":38.39,"currency_code":"GBP","in_stock":true},{"title":"10 Litre","offer_id":31447781474436,"sku":"GK0853CLE-1000","price":140.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/owatrolmarine.png?v=1664200971"},{"product_id":"owatrol-d1-pro-d-1","title":"Owatrol D1 Pro - D.1","description":"\u003cp\u003eD.1 PRO with added UV inhibitors, is a high performance oil which saturates the wood to replace those that have been lost. Pushing out moisture and air and filling the woods pores with rich oil, it stabilises the wood to provide long lasting protection.\u003c\/p\u003e\r\n\u003cp\u003eFor interior and exterior timber, horizontal or vertical surfaces, D.1 PRO enhances the natural beauty of the wood whilst also being easy to use and maintain, requiring no sanding or stripping.\u003c\/p\u003e\r\n\u003ch2\u003eIdeal uses for D.1 Pro\u003c\/h2\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eGreat for use on tropical hardwoods such as Ipe, Teak, Bangkirai, Mahogany etc\u003c\/li\u003e\r\n\u003cli\u003eFor exterior wooden surfaces such as decking, garden furniture, fences, cladding etc\u003c\/li\u003e\r\n\u003cli\u003eFor interior wooden surfaces such as floors, stairs, door \u0026amp; window frames etc\u003c\/li\u003e\r\n\u003cli\u003eHorizontal \u0026amp; Vertical Surfaces\u003c\/li\u003e\r\n\u003cli\u003eIdeal for dense, greasy or difficult to impregnate hardwood.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cdiv\u003e \u003c\/div\u003e","brand":"Owatrol","offers":[{"title":"1 Litre \/ Honey","offer_id":31447785767044,"sku":"GK0292COL0100","price":30.35,"currency_code":"GBP","in_stock":true},{"title":"5 Litre \/ Honey","offer_id":31447785799812,"sku":"GK0292COL0500","price":136.35,"currency_code":"GBP","in_stock":true},{"title":"20 Litre \/ Honey","offer_id":31447785734276,"sku":"GK0292COL2000","price":525.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/d1pro-en_5.jpg?v=1576905485"},{"product_id":"albany-yacht-varnish","title":"Albany Yacht Varnish","description":"\u003cp\u003eHighly durable and flexible finish\u003c\/p\u003e\r\n\u003cp\u003eClear weatherproof protection\u003c\/p\u003e\r\n\u003cp\u003eCovers 13m² per litre\u003c\/p\u003e\r\n\u003cp\u003eRe-coatable after 16-24 hours - touch dry in 4-6 hours\u003c\/p\u003e\r\n\u003cp\u003eExcellent gloss retention\u003c\/p\u003e\r\n\u003cp\u003eApply using a quality long bristle brush\u003c\/p\u003e\r\n\u003cp\u003eApply 2-3 coats as required maintaining a wet edge\u003c\/p\u003e\r\n\u003cp\u003eOn timber lay off in the direction of the grain\u003c\/p\u003e\r\n\u003cp\u003eAvailable in 1lt and 2.5lt sizes in clear gloss only\u003c\/p\u003e","brand":"Trade Paint Direct","offers":[{"title":"2.5 Litre","offer_id":31447915167876,"sku":"DN278GLO0250","price":41.35,"currency_code":"GBP","in_stock":true},{"title":"1 Litre","offer_id":31447915200644,"sku":"DN278GLO0100","price":19.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/yacht-varnish.jpg?v=1576906681"},{"product_id":"owatrol-deep-cleaner","title":"Owatrol Deep Cleaner","description":"\u003cp\u003eDeep Cleaner is a powerful remover and cleaner, free from solvents and paraffin, that strips out new, old and encrusted oils from exterior wooden surfaces and also cleans severely weathered wood. Biodegradable, Deep Cleaner is suitable for environmentally sensitive areas, as it’s gel consistency means it will not run making it ideal for use on vertical surfaces.\u003c\/p\u003e\n\u003cp\u003eEasy to apply and fast acting, Deep Cleaner quickly and efficiently removes the millglaze, which is created in the manufacturing process, from the surface of new wood, thus improving the penetration and adhesion of a finish.\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for Deep Cleaner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCan be used on all exterior woods, softwoods and hardwoods\u003c\/li\u003e\n\u003cli\u003eBiodegradable and water washable\u003c\/li\u003e\n\u003cli\u003eCleans weathered woods\u003c\/li\u003e\n\u003cli\u003eCan be applied to horizontal or vertical surfaces due to it’s gel like consistency\u003c\/li\u003e\n\u003cli\u003e Removes millglaze, therefore improving the overall finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface preparation\u003c\/h2\u003e\n\u003cp\u003eRemove any loose and flaking finish.\u003cbr\u003eBrush off any physical surface contamination e.g. moss, general dirt etc.\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eUse as is, \u003cstrong\u003eDo Not\u003c\/strong\u003e dilute.\u003cbr\u003eWork large areas in zones.\u003cbr\u003eAlways work in direction of the grain. Do Not use a wire brush.\u003cbr\u003eAfter rinsing, immediately treat the surface with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/deck-cleaner\/\"\u003eDeck Cleaner\u003c\/a\u003e while still wet.\u003cbr\u003eAllow wood to dry thoroughly, 2-3 days before refinishing.\u003c\/p\u003e\n\u003ch3\u003eTest Procedure\u003c\/h3\u003e\n\u003cp\u003eApply Deep Cleaner.\u003cbr\u003eAllow to work 5 minutes.\u003cbr\u003eScrub surface to see if finish or dirt is lifting.\u003cbr\u003eIf lifting commence with job, if not wait a further 5 minutes and test again, continue this process up to a maximum of 20 minutes.\u003c\/p\u003e\n\u003ch3\u003eStripping and cleaning\u003c\/h3\u003e\n\u003cp\u003eWork in areas that can be completed in 5-20 minutes, then move on to the next area until the entire surface is stripped or clean.\u003cbr\u003eApply Deep cleaner to the area to be stripped or cleaned and allow to work.\u003cbr\u003eAfter time established in the test, scrub the surface with a stiff nylon brush, if required flush with water at the same time OR use a power washer (max 60 bars\/870 psi).\u003cbr\u003eThoroughly rinse the surface after stripping\/cleaning including any adjacent areas, with fresh clean water.\u003cbr\u003eNB: The use of hot water makes the job easier.\u003c\/p\u003e\n\u003ch3\u003eReducing millglaze\u003c\/h3\u003e\n\u003cp\u003eApply Deep Cleaner to the area to be treated.\u003cbr\u003eAllow to work 10-15 minutes depending on wood type.\u003cbr\u003eScrub surface with stiff nylon scrubbing brush, if required flush with water at the same time OR use a power washer (max 60 bars\/870 psi).\u003cbr\u003eAfter removing the millglaze, thoroughly rinse the surface including any adjacent areas with fresh clean water.\u003c\/p\u003e\n\u003ch3\u003eClean up\u003c\/h3\u003e\n\u003cp\u003eDue to Deep Cleaner being made with biodegradable ingredients, all you need for clean up is water.\u003c\/p\u003e\n\u003ch2\u003eThings to remember\u003c\/h2\u003e\n\u003cp\u003eAlways carry out a preliminary test prior to commencing the job, to determine the contact time necessary for stripping or cleaning the wood.\u003cbr\u003eWhen stripping or cleaning areas that have caulking, ALWAYS carry out a test by applying Deep Cleaner to a small area and allow it to sit for 20 minutes before scrubbing and rinsing off to determine that there is no reaction.\u003cbr\u003eWear chemical resistant gloves, safety goggles and protective clothing.\u003cbr\u003eAlways treat stripped and cleaned surfaces with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/deck-cleaner\/\"\u003eDeck Cleaner\u003c\/a\u003e to neutralise the surface and restore the wood’s colour.\u003cbr\u003eWoods rich in tannins e.g. Cedar, Oak, Teak, Mahogany etc may darken with Deep Cleaner. Where Deep Cleaner has darkened the wood DO NOT allow it to dry, prior to using \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/deck-cleaner\/\"\u003eDeck Cleaner.\u003c\/a\u003e\u003cbr\u003eCover and protect everything you do not wish to strip or clean, including any aluminium surfaces.\u003cbr\u003eWhen stripping or cleaning vertical surfaces, work from bottom to top to avoid streaking.\u003cbr\u003eApply between 5°C (41°F) and 35°C (95°F). Do not apply in direct sunlight or to a hot surface.\u003cbr\u003eDo not allow Deep Cleaner to dry on the surface. If drying occurs dampen with a mist application of water.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eConsult us for additional information and advice prior to using Deep Cleaner on Oak and Chestnut.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Owatrol","offers":[{"title":"2.5 Litre","offer_id":39599197421736,"sku":"GK0619CLE0250","price":44.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Deepcleaner-packaging.png?v=1617627806"},{"product_id":"owatrol-deck-cleaner","title":"Owatrol Deck Cleaner","description":"\u003cp data-canvas-width=\"656.3633333333333\"\u003eeck Cleaner is a powerful cleaner and brightener that removes ground in and surface dirt while restoring a bright, vibrant look to fiberglass and grey, weather-beaten marine wood such as teak and mahogany that is unfinished, to its natural colour without bleaching. Unlike bleach or chlorine-based cleaners, Deck Cleaner will not damage the wood’s fibres. Deck Cleaner is fast-acting and can restore the original colour of your wood surface in as little as 20 minutes with no laborious and backbreaking sanding! It is safe to use on all wood species including teak, iroko, mahogany, oak, larch and pine and is also an excellent degreaser for use on tropical hardwoods to allow finishes like \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/deks-olje-d1\/\" target=\"_blank\"\u003eDeks Olje D1\u003c\/a\u003e to penetrate.\u003c\/p\u003e\n\u003cp\u003eDeck Cleaner can remove rust stains and will also neutralise wood surfaces which have been stripped with a stripping product such as Owatrol’s \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/marine-strip\/\" target=\"_blank\"\u003eMarine Strip\u003c\/a\u003e, leaving the surface ready for applying your chosen finish. Deck Cleaner can also be used to restore the lustre to faded plastics and fiberglass dulled by weathering and UV rays. Deck Cleaner is biodegradable and does not contain solvents or bleach, you can rinse it simply with water.\u003c\/p\u003e\n\u003cdiv data-canvas-width=\"654.8466666666667\"\u003e\n\u003ch2\u003eIdeal Uses for Deck Cleaner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReviving neglected decks and handrails\u003c\/li\u003e\n\u003cli\u003eNeutralising stripped surfaces before applying a finish\u003c\/li\u003e\n\u003cli\u003eDegreasing tropical hardwoods to aid penetration of your chosen finish\u003c\/li\u003e\n\u003cli\u003eCleaning previously coated wood surfaces which are dirty\u003c\/li\u003e\n\u003cli\u003eLightening and restoring greyed weathered marine wood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNOTE: Wear chemical resistant gloves, safety goggles and protective clothing\u003c\/p\u003e\n\u003ch2\u003eApplication of Deck Cleaner\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e Surfaces may be slippery when wet. Use caution when walking on wet surfaces during application. Deck Cleaner may dull painted surfaces and some metal fixings if left on too long. Rinse off quickly or wipe with a wet cloth.\u003c\/p\u003e\n\u003ch3\u003eApplying Deck Cleaner to Wood\u003c\/h3\u003e\n\u003cp\u003eFirst wet surface with fresh, clean water. Then apply Deck Cleaner with a synthetic brush or roller (medium or long pile) and scrub the surface with a stiff nylon or synthetic brush. Leave it to stand for approximately 10-20 minutes. If the surface starts to dry, dampen it with a mist application of water.\u003c\/p\u003e\n\u003cp\u003eAfter waiting for 10-20 minutes, scrub the surface whilst rinsing with water or use a pressure washer (max. 60 bar). If required, repeat the procedure. Allow the wood to dry for 48 hours or until the wood meets the moisture content required by the chosen finish.\u003c\/p\u003e\n\u003ch3\u003eApplying Deck Cleaner to Plastic or GRP\u003c\/h3\u003e\n\u003cp\u003eFirst, wet the surface with fresh clean water. Next, apply Deck Cleaner using a brush and leave it for 10-20 minutes to work. Now scrub the surface with a soft or medium nylon scrubbing brush and rinse with large amounts of fresh clean water.\u003c\/p\u003e\n\u003ch3\u003eApplying Deck Cleaner to rust stains\u003c\/h3\u003e\n\u003cp\u003eFirst, wet the surface with fresh clean water Then apply Deck Cleaner with a stiff nylon scrubbing brush working it into the rust stain.\u003c\/p\u003e\n\u003cp\u003eLeave it to work for a minimum of 10 minutes or until the stain has gone. Then scrub the surface with stiff nylon scrubbing brush and rinse with large amounts of fresh clean water.\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eClean all tools used with soap and water.\u003c\/p\u003e\n\u003ch2\u003eAfter Clean Up\u003c\/h2\u003e\n\u003cp\u003eWe recommend protecting and enhancing the natural beauty of your wood with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/woodcare\/exterior-wood\/\" target=\"_blank\"\u003eOwatrol penetrating wood finishes\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eThings to Remember\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShake container thoroughly before use.\u003c\/li\u003e\n\u003cli\u003eCover any areas you want to protect.\u003c\/li\u003e\n\u003cli\u003eThoroughly wet surrounding plants and shrubs.\u003c\/li\u003e\n\u003cli\u003eApply between 5˚C and 35˚C.\u003c\/li\u003e\n\u003cli\u003eDo not apply on a hot surface as the product will dry too quickly.\u003c\/li\u003e\n\u003cli\u003eIf cleaning vertical wood, work from bottom to top to avoid streaking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Owatrol","offers":[{"title":"1 Litre","offer_id":39599240315048,"sku":"GK0280CLE0100","price":17.59,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre","offer_id":39599240347816,"sku":"GK0280CLE0250","price":36.16,"currency_code":"GBP","in_stock":true},{"title":"15 Litre","offer_id":39599240380584,"sku":"GK0280CLE1500","price":161.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Deepcleaner-packaging_5f09e8d4-748f-4b19-8272-06e06248ef76.png?v=1617628096"},{"product_id":"owatrol-marine-oil","title":"Owatrol Marine Oil","description":"\u003cp\u003eMarine Oil is deeply saturating, versatile air-drying oil. It can be simply used alone, added to oil-based paint as a conditioner, for wood impregnation or to aid adhesion of finishes.\u003c\/p\u003e\n\u003ch3\u003eFor use as a rust inhibitor\u003c\/h3\u003e\n\u003cp\u003eWhen using as a rust inhibitor, Marine Oil penetrates deep into the surface pushing out any excess moisture or air. Doing this to rusted metal will stabilise it and stop any further rust from forming. Marine Oil’s unique formula creates a strong yet flexible finish that will not peel or flake.\u003c\/p\u003e\n\u003cp\u003eIf you are wanting to use Marine Oil on brand new metal surfaces, we would instead recommend you use \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/ap60\/\" target=\"_blank\"\u003eanti-corrosive primer AP60\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFor use as a paint conditioner\u003c\/h3\u003e\n\u003cp\u003eIf being used as a paint conditioner and being added to any alkyd or oil-based coating, Marine Oil will improve the paint flow making it easier to work with, increasing the wet edge time and offering greater adhesion of the paint. Other damaging thinners will not be able to maintain the colour, appearance or overall quality that Marine Oil does.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eN.B\u003c\/strong\u003e – If you are using a water-based paint but wish to gain the same effect, please instead use Owatrol Floetrol. \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/floetrol\/\" target=\"_blank\"\u003eFloetrol paint conditioner\u003c\/a\u003e is formulated to be used in any water-based paint, whereas Marine Oil is to be used in any oil-based paint.\u003c\/p\u003e\n\u003ch3\u003eFor use in wood impregnation\u003c\/h3\u003e\n\u003cp\u003eWhen being used for wood impregnation, Marine Oil deeply saturates into dry wood, protecting it from the damaging effects of moisture. Doing this will help prevent paint from peeling from the wood and also protect any latches or hinges from corrosion.\u003c\/p\u003e\n\u003ch3\u003eFor advanced adhesion\u003c\/h3\u003e\n\u003cp\u003eMarine Oil will leave a bonding film the surface, maintaining the natural look yet allowing for enhanced adhesion. This makes it suitable for use as a foundation for finishing coats or primers. Marine Oil offers premium adhesion to surfaces such as aluminium, galvanised steel, wood, zinc and more! Application of Marine Oil creates a base for which paint can be directly applied to even firm rust and is also heat resistant to 175°C\u003c\/p\u003e\n\u003ch2\u003eIdeal Uses for Marine Oil\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePreventing further damage in heavily rusted surfaces on hulls and tanks\u003c\/li\u003e\n\u003cli\u003ePriming galvanised metals eliminating the need for weathering or pickling\u003c\/li\u003e\n\u003cli\u003eImproving the flow of paint and its work-ability\u003c\/li\u003e\n\u003cli\u003ePreventing paint from peeling from wooden surfaces\u003c\/li\u003e\n\u003cli\u003eProtecting steel structures such as railings, engine parts, pipes, stairs etc\u003c\/li\u003e\n\u003cli\u003eAssuring better adhesion of finishes\u003c\/li\u003e\n\u003cli\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003ch3\u003eSurface preparation when using Marine Oil as a rust inhibitor\u003c\/h3\u003e\n\u003cp\u003eFirst, surfaces must be clean, dry and free from oil, grease and other surface contaminants. Remove all scale; loose and flaking rust and old paint back to a sound surface and edge and feather in any sharp edges. Surfaces exposed to chemicals (acids, alkali or salt deposits) should be washed using copious amounts of water or steam cleaned. Severely contaminated surfaces should be cleaned using an appropriate solvent.\u003c\/p\u003e\n\u003cp\u003eDo not remove firm rust or clean the metal back to a bright finish.\u003c\/p\u003e\n\u003ch3\u003eSurface preparation when using Marine Oil as a paint conditioner\u003c\/h3\u003e\n\u003cp\u003eFirst prepare the surface as per the instructions on your paint can. In addition, if not asked to, ensure that you remove all loose and flaking material and treat any organic growth with fungicidal solution or a mix of 1 part water to 1 part chlorine bleach (allow bleach solution to sit for 15 minutes), rinse thoroughly and allow to dry.\u003c\/p\u003e\n\u003ch2\u003eApplying Marine Oil as a Rust Inhibitor\u003c\/h2\u003e\n\u003ch3\u003eUsing Marine Oil on new clean steel\u003c\/h3\u003e\n\u003cp\u003eFirst prime new steel with a mix of 1 part Marine Oil to 3 parts primer. Then follow with normal paint system adding Marine Oil to subsequent coats as directed under ‘Mixing instructions’ below.\u003c\/p\u003e\n\u003ch3\u003eUsing Marine Oil on lightly rusted surfaces\u003c\/h3\u003e\n\u003cp\u003eFirst prime the surface with a mix of 1 part Marine Oil to 2 parts primer. Then follow with normal paint system adding Marine Oil to subsequent coats as directed under ‘Mixing instructions’ below.\u003c\/p\u003e\n\u003ch3\u003eUsing Marine Oil on new unpainted rusty steel\u003c\/h3\u003e\n\u003cp\u003eFirst prime the surface with a mix of 1 part Marine Oil to 1 part Primer. Then follow with normal paint system adding Marine Oil to subsequent coats as directed under ‘Mixing instructions’ below.\u003c\/p\u003e\n\u003ch3\u003eUsing Marine Oil on old, severely rusted or previously coated surfaces\u003c\/h3\u003e\n\u003cp\u003eFirst, apply wet on wet applications of Marine Oil to all exposed rust until fully saturated and allow it to dry. Saturation is indicated by a uniform glossy appearance to the surface when Marine Oil is dry. Before Marine Oil has hardened, check the surfaces and remove rust scale and old paint loosened by the above. If needed, touch up these areas. Allow to dry. Next, apply a mix of 1 part Marine Oil to 2 parts primer and allow to dry. Then follow with normal paint system adding Marine Oil to subsequent coats as directed under ‘Mixing instructions’ below.\u003c\/p\u003e\n\u003cp\u003eNote: Marine Oil will not lift well-bonded paint.\u003c\/p\u003e\n\u003ch2\u003eApplying Marine Oil as a Paint Conditioner\u003c\/h2\u003e\n\u003cp\u003eFirst, apply paint in normal the manner. If the paint is sticky, drags, sets up to fast or does not level properly add Marine Oil (stirring in well) until the paint works smoothly, easily and evenly. Allow the brush, roller or sprayer to be your guide.\u003c\/p\u003e\n\u003ch3\u003eUsing Marine Oil as a Paint Conditioner for wood surfaces in sound condition\u003c\/h3\u003e\n\u003cp\u003eFirst prime any bare wood with a mix of 1 part Marine Oil to 2 parts primer and allow to dry. Follow with normal paint system adding Marine Oil as in ‘Mixing Instructions’ below.\u003c\/p\u003e\n\u003ch3\u003eUsing Marine Oil as a Paint Conditioner on damaged, soft or punky wood surfaces\u003c\/h3\u003e\n\u003cp\u003eFirst apply 2 to 4 liberal applications of Marine Oil wet on wet, as fast as the wood will absorb it. Do not allow Marine Oil to dry between applications. When the wood cannot absorb any more wipe up any excess and allow to dry overnight (12 hrs). Follow with normal paint system adding Marine Oil as in ‘Mixing Instructions’ below to ease application and aid adhesion.\u003c\/p\u003e\n\u003ch2\u003eMixing instructions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTopcoat:\u003c\/strong\u003e As required – normally 5 %-20 % by volume.\u003cbr\u003e\u003cstrong\u003eUndercoat:\u003c\/strong\u003e up to 30 % by volume.\u003cbr\u003e\u003cstrong\u003ePrimer:\u003c\/strong\u003e up to 50 % by volume.\u003c\/p\u003e\n\u003cp\u003eThe above is meant as a guide only. Conditions of application, the porosity of surface etc. will dictate the amount of Owatrol Oil to be mixed into the paint.\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eClean all tools and equipment with white spirits while still wet. If allowed to dry, remove with paint stripper. Store and maintain equipment as directed by the manufacturer.\u003c\/p\u003e\n\u003cp\u003eNOTE: Any rags, steel wool etc soaked in Marine Oil may spontaneously catch fire if improperly discarded. Rags, steel wool etc must be saturated with water after use or placed in a sealed, water-filled metal container, before disposing with household waste.\u003c\/p\u003e\n\u003ch2\u003eRestrictions\u003c\/h2\u003e\n\u003cp\u003eDo not mix or overcoat Marine Oil with paints containing hot solvents i.e. Xylene, 2 part coatings, chlorinated rubber etc. – for these type of paints use \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/cip-corrosive-inhibiting-primer\/\" title=\"CIP Corrosive Inhibiting Primer\" target=\"_blank\"\u003eOwatrol CIP\u003c\/a\u003e instead. Do not use Marine Oil as a paint conditioner in water-based paints, for this purpose use \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/floetrol\/\" target=\"_blank\"\u003eFloetrol\u003c\/a\u003e instead – Owatrol’s water-based paint conditioner.\u003c\/p\u003e\n\u003ch2\u003eThings to Remember\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover everything you do not wish to paint.\u003c\/li\u003e\n\u003cli\u003eApply between + 5°C and + 35°C.\u003c\/li\u003e\n\u003cli\u003eDo not apply in direct sunlight or on to hot surfaces.\u003c\/li\u003e\n\u003cli\u003eTest for compatibility when adding Marine Oil to paint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"0.5 Litre","offer_id":39599318663336,"sku":"GK0293CLE0250","price":15.27,"currency_code":"GBP","in_stock":true},{"title":"1 Litre","offer_id":39599318630568,"sku":"GK0293CLE0100","price":25.75,"currency_code":"GBP","in_stock":true},{"title":"5 Litre","offer_id":39599318696104,"sku":"GK0293CLE2000","price":105.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/marine-oil.png?v=1617628741"},{"product_id":"owatrol-pid-60-marine","title":"Owatrol PID 60 Marine","description":"\u003cp\u003ePID 60 Marine is a universal anti-rust primer made from alkyd resins and anti-corrosive pigments, for the priming and protection of ferrous and non-ferrous metals, gelcoat, galvanised and old painted surfaces etc.\u003c\/p\u003e\n\u003cp\u003eIt is a single pack, anti-rust primer and bonding coat, that keeps surfaces rust free before handling and\/or shipping. It is easy to apply and offers excellent adhesion with good filling properties.\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for PID 60 Marine\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePriming non ferrous metals such as galvanised, zinc and aluminium\u003c\/li\u003e\n\u003cli\u003ePriming ferrous metals such as steel, iron etc\u003c\/li\u003e\n\u003cli\u003eUse to prime previously painted surfaces\u003c\/li\u003e\n\u003cli\u003eIdeal for use on horizontal and vertical surfaces\u003c\/li\u003e\n\u003cli\u003eOnce applied, you can overcoat with all types of rust protecting finishes – 1 or 2 pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eSurface must be clean, dry and free of oil, grease, salt and other surface contamination including any sanding, blasting or other preparation residue before applying PID 60 Marine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal Surfaces exc. Galvanised, Zinc and Aluminium:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePrior to blasting or manually preparing the surface all salt contamination should be removed using fresh water and the surface dried. All oils, grease etc. must be thoroughly removed using a suitable cleaning solvent e.g. Acetone.\u003c\/p\u003e\n\u003cp\u003eDeposits firmly adhered to the surface should first be removed by scraping and then cleaned using the solvent. Remove all traces of mill scale, rust, rust scale and other foreign matter by blast cleaning to SIS-Sa2½ or at the least manually to SIS-St3 by grinding (P24-P36) or sanding (40-120 grit).\u003c\/p\u003e\n\u003cp\u003eRemove all blast and manual preparation residue by vacuum cleaner, air blower or a stiff clean brush. For difficult areas the removal of rust by chemical means may be possible with undiluted \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/owayell\/\"\u003eOwayell\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAluminium:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThoroughly clean surface using \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/owaclean\/\"\u003eOwaclean\u003c\/a\u003e or a suitable solvent e.g. Acetone. Blast surface using a suitable medium or sand with 24-120 grit abrasive compatible with Aluminium. Remove all blast and manual preparation residue by vacuum cleaner, air blower or a stiff clean brush. For difficult areas pickle the surface using diluted \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/owayell\/\"\u003eOwayell\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGalvanised\/Zinc:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThoroughly clean surface using \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/owaclean\/\"\u003eOwaclean\u003c\/a\u003e or a suitable solvent e.g. Acetone. Pickle the surface using diluted \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/owayell\/\"\u003eOwayell\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGelcoat\/Plastic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClean surface with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/owaclean\/\"\u003eOwaclean\u003c\/a\u003e or hot soapy water, rinse thoroughly and allow to dry. Abrade with 180-220 grit sanding discs. Remove all sanding residue by vacuum cleaner, stiff clean brush, tack cloth or a cloth soaked in a fast flashing solvent e.g. Methylated Spirits (Not White Spirits).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eChecking existing finish for adhesion by using the Cross Hatch test method. If existing finish is weekly adhered it must be completely and thoroughly removed by blast cleaning to SIS-Sa2½ or at the least manually to SIS-St3. If coating is well adhered proceed as follows: Thoroughly clean and sand\/blast surface to form a good key, feather in any sharp edges and any bare areas of metal to be manually prepared to at least SIS-St3.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote: It is imperative that prepared bare metal surfaces are coated with PID 60 Marine within 8 hours.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eStir well before and during use.\u003c\/p\u003e\n\u003cp\u003eApply an even, single coat at the recommend wet film thickness.\u003c\/p\u003e\n\u003cp\u003eAllow to dry.\u003c\/p\u003e\n\u003cp\u003eIf required a second coat may be applied.\u003c\/p\u003e\n\u003cp\u003ePID 60 Marine may be diluted up to 30% with White Spirits for spray application (NOT Airless or Airmix).\u003c\/p\u003e\n\u003cp\u003eIf a perfectly smooth surface is required PID 60 Marine may be sand when 100% cured before applying the finish.\u003c\/p\u003e\n\u003cp\u003eIf the over-coating time of PID 60 Marine exceeds 5 days, clean surface with a suitable solvent e.g. Acetone. Sand with 220-230 grit abrasive and dust off.\u003c\/p\u003e\n\u003cp\u003eWipe surface with a cloth soaked in Methylated Spirits or a tack cloth to remove any remaining sanding residue.\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eStir well before and during use. Apply an even, single coat at the recommend wet film thickness. Allow to dry. If required a second coat may be applied.\u003c\/p\u003e\n\u003ch2\u003eThings to Remember\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover everything you do not wish to paint, especially when applying by roller or spray.\u003c\/li\u003e\n\u003cli\u003eApply between 5°C (41°F) and 35°C (95°F). Substrate temperature should be between 5°C (41°F) and 35°C (95°F).\u003c\/li\u003e\n\u003cli\u003eEnsure substrate is at least 3°C above dew point.\u003c\/li\u003e\n\u003cli\u003eDo not apply in direct sunlight or to hot surfaces (35°C+ (95°F+).\u003c\/li\u003e\n\u003cli\u003eDrying time is affected by 3 factors: Temperature, ideally understood to be between 5°C (41°F) and 35°C (95°F).\u003c\/li\u003e\n\u003cli\u003eRelative humidity, ideally between 50% and 60%.\u003c\/li\u003e\n\u003cli\u003eGood ventilation in the working area.\u003c\/li\u003e\n\u003cli\u003eIf one of the above conditions is not met the drying time of PID 60 Marine should be extended to avoid risk of a reaction with the finish coat.\u003c\/li\u003e\n\u003cli\u003eUse appropriate protective clothing especially when spraying e.g. gloves, goggles, mask etc.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"0.75 Litre","offer_id":39599407005864,"sku":"GK0101GRE0010","price":32.35,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre","offer_id":39599407038632,"sku":"GK0101GRE0250","price":76.12,"currency_code":"GBP","in_stock":true},{"title":"20 Litre","offer_id":39599432401064,"sku":"GK0101GRE0200","price":458.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/PID60Marine-webready.png?v=1617629181"},{"product_id":"owatrol-owalak-marine-enamel","title":"Owatrol Owalak Marine Enamel","description":"\u003cp\u003eOwatrol’s Owalak is a premium, high gloss marine enamel for use on all substrates above the waterline. Tough and long lasting, Owalak is resistant to salt and pollutants, while also possessing excellent flexibility and UV resistance.\u003c\/p\u003e\n\u003cp\u003eIt is easy to apply and ensures an exceptional professional looking finish. Owalak offers excellent UV and anti-corrosive properties, while also renewing, protecting and decorating dull surfaces.\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for Owalak\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInterior and Exterior\u003c\/li\u003e\n\u003cli\u003eAll Surfaces above the waterline.\u003c\/li\u003e\n\u003cli\u003eMetal (Aluminium, Steel, Galvanised steel, etc.), Painted surfaces, Wood, Gelcoat etc\u003c\/li\u003e\n\u003cli\u003ePreviously painted surfaces – Polyurethane, Epoxy, Alkyd, Acrylic etc\u003c\/li\u003e\n\u003cli\u003ePipes, Machinery, Superstructures, Handrails, Cabins etc\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eSurfaces must be clean, dry, in sound condition and free of oil, grease and other surface contamination including any preparation residue e.g. blasting, sanding etc. before applying Owalak.\u003c\/p\u003e\n\u003cp\u003ePrior to blasting or manually preparing the surface all salt contamination should be removed using fresh water and the surface allowed to dry. All oils, grease etc. must be thoroughly removed using a suitable cleaning solvent e.g. \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/owaclean\/\"\u003eOwaclean\u003c\/a\u003e or Acetone. Deposits firmly adhered should first be removed by scraping and then cleaned using the solvent.\u003c\/p\u003e\n\u003ch3\u003ePainted Surfaces\u003c\/h3\u003e\n\u003cp\u003eConduct adhesion test using the Cross Hatch method.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoating in Good Condition and Well Adhered\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClean surface with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/owaclean\/\"\u003eOwaclean\u003c\/a\u003e or other suitable cleaning agent. Sand surface with 80-100 grit abrasive paper feathering in any sharp edges. Dust off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpot prime any bare areas with Owalak plus 25% \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/marine-oil\/\"\u003eMarine Oil.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal, Gelcoat etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSpot prime any bare areas with PID 60 Marine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoating in Poor Condition and Poorly Adhered\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStrip surfaces with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/dsp-800-multi-purpose-stripper\/\"\u003eDSP 800\u003c\/a\u003e, \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/marine-strip\/\"\u003eMarine Strip\u003c\/a\u003e or by mechanical abrasion. Sand surface with 80-100 grit abrasive paper. Dust off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePrime with Owalak plus 25% \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/marine-oil\/\"\u003eMarine Oil\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal, Gelcoat etc.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePrime surface with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/pid-60-marine\/\"\u003ePID 60 Marine\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eUncoated Wooden Surfaces\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eNew\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTreat with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/deep-cleaner\/\"\u003eDeep Cleaner\u003c\/a\u003e, neutralise with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/deck-cleaner\/\"\u003eDeck Cleaner\u003c\/a\u003e. Alternatively sand surface with 80 grit (max) abrasive paper. Dust off and wipe surface with a cloth soaked in Acetone, Methylated Spirits, or similar (NOT White Spirit) to remove any remaining sanding residue and degrease the surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeathered Wood\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClean with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/deck-cleaner\/\"\u003eDeck Cleaner\u003c\/a\u003e  or thoroughly sand with coarse abrasive paper to remove all signs of dead denatured wood fibres. Sand surface with 80-100 grit abrasive paper to smooth off. Dust off and wipe surface with a cloth soaked in Acetone, Methylated Spirits, or similar (NOT White Spirit) to remove any remaining sanding residue and degrease the surface. Prime, prepared new\/weathered wood with Owalak plus 25% \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/marine-oil\/\"\u003eMarine Oil\u003c\/a\u003e. Allow to dry 24 hours.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNew Metal Surfaces exc. Aluminium:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClean surface with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/owaclean\/\"\u003eOwaclean\u003c\/a\u003e or other suitable cleaning agent. Blast, grind (P24-P36) or sand (40-120 grit) surface. Inaccessible areas may be prepared using diluted \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/owayell\/\"\u003eOwayell\u003c\/a\u003e. Prime surface with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/pid-60-marine\/\"\u003ePID 60 Marine. \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRusted Metal Surfaces:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLight to Moderate Rust: Remove all loose and flaking rust. Clean surface with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/owaclean\/\"\u003eOwaclean\u003c\/a\u003e or other suitable cleaning agent. Saturate surface with Marine Oil. Allow to dry 24 -72 hours.\u003c\/p\u003e\n\u003cp\u003eHeavy to Severe Rust: Clean surface with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/owaclean\/\"\u003eOwaclean\u003c\/a\u003e or other suitable cleaning agent. Blast, grind (P24-P36) or sand (40-120 grit) to remove all rust back to bare clean metal. Inaccessible areas may be prepared using undiluted \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/owayell\/\"\u003eOwayell\u003c\/a\u003e. Prime surface with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/pid-60-marine\/\"\u003ePID 60 Marine. \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAluminium:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClean surface with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/owaclean\/\"\u003eOwaclean\u003c\/a\u003e or Acetone. Blast or sand surface with 24-120 grit paper. Inaccessible areas may be prepared using diluted \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/owayell\/\"\u003eOwayell\u003c\/a\u003e Prime with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/pid-60-marine\/\"\u003ePID 60 Marine\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGelcoat\/Plastic:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRemove all traces of silicone, wax, paraffin etc. with Acetone. Clean surface with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/owaclean\/\"\u003eOwaclean\u003c\/a\u003e or hot soapy water. Rinse thoroughly and allow to dry. Sand with 180-220 grit sanding discs. Prime surface with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/pid-60-marine\/\"\u003ePID 60 Marine.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eStir product well before and during use. Do not thin unless otherwise indicated.\u003c\/p\u003e\n\u003cp\u003eApply 2 or 3 even coats allowing drying time between each coat.\u003c\/p\u003e\n\u003cp\u003eOptional Brush\/Roller application – 5% \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/marine-oil\/\"\u003eMarine Oil\u003c\/a\u003e may be added to the 1st finish coat.\u003c\/p\u003e\n\u003cp\u003eSpray application – 5% \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/marine-oil\/\"\u003eMarine Oil\u003c\/a\u003e or White Spirit may be added to ease application.\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eClean all tools and equipment with white spirit while still wet. If allowed to dry, remove with paint stripper.\u003c\/p\u003e\n\u003cp\u003eNOTE: Any rags, steel wool etc. soaked in Owalak may spontaneously catch fire if improperly discarded. Rags, steel wool etc. must be saturated with water after use or placed in a sealed, water filled metal container, before disposing with household waste.\u003c\/p\u003e\n\u003ch2\u003eThings to remember\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProtect everything you do not wish to coat.\u003c\/li\u003e\n\u003cli\u003eApply between 5°C (41°F) and 35°C (95°F).\u003c\/li\u003e\n\u003cli\u003eSubstrate temperature should be between 5°C (41°F) and 35°C (95°F).\u003c\/li\u003e\n\u003cli\u003eEnsure substrates are at least 3°C above dew point.\u003c\/li\u003e\n\u003cli\u003eDo not apply in direct sunlight or to hot surfaces (35°C+).\u003c\/li\u003e\n\u003cli\u003eSurfaces must be fully dry before applying any coating.\u003c\/li\u003e\n\u003cli\u003eDo not apply if cold and\/or wet weather is expected within 24 hours.\u003c\/li\u003e\n\u003cli\u003eUse appropriate protective clothing e.g. gloves, goggles, mask etc.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"1 Litre","offer_id":39599439577256,"sku":"GK0293CLE0100","price":58.75,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre","offer_id":39599439610024,"sku":"GK0293CLE2000","price":104.29,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Owalak-webready.png?v=1617629457"},{"product_id":"owatrol-glv-aluminium-boat-paint","title":"Owatrol GLV Aluminium Boat Paint","description":"\u003cp\u003eOwatrol GLV is a highly flexible, anti corrosive coating with a high gloss finish that possesses the deep penetrating and adhesion properties of \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/marine-oil\/\"\u003eMarine Oil\u003c\/a\u003e so the finish will not peel or flake and will even adhere well to clean, bright steel. Owatrol GLV marine aluminium paint will restore rusted and corroded surfaces to an acceptable appearance to give lasting protection and greatly prolong the life of the treated surface. It has excellent resistance to the effects of the weather and does not emit harmful fumes so can be applied even in confined spaces.\u003c\/p\u003e\n\u003cp\u003eOwatrol GLV has excellent abrasion resistance, withstands chemical attack and is ideal in aggressive climatic conditions where a high resistant finish is necessary. Originally developed for the shipping industry Owatrol GLV became a favourite cargo hold coating; carrying approval for the carriage of grain. It can withstand temperatures up to 175°C once cured and offers excellent light and heat reflecting properties.\u003c\/p\u003e\n\u003ch2\u003eIdeal Uses for Owatrol GLV marine aluminium paint\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCoating aluminium, steel and galvanised surfaces above the waterline\u003c\/li\u003e\n\u003cli\u003eProtecting already rusted tanks and machinery\u003c\/li\u003e\n\u003cli\u003eResisting damage in aggressive climatic conditions\u003c\/li\u003e\n\u003cli\u003eResisting weathering effects on pipes and pumps\u003c\/li\u003e\n\u003cli\u003eProviding long lasting protection against corrosion for new steelwork\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eFirst all surfaces must be clean, dry and free from oil, grease and other surface contaminants. Remove all scale; loose and flaking rust and old paint back to a sound surface and edge and feather in any sharp edges. Surfaces exposed to chemicals (acids, alkali or salt deposits) should be washed using copious amounts of water or steam cleaned. Severely contaminated surfaces should be cleaned using an appropriate solvent.\u003c\/p\u003e\n\u003ch2\u003eApplying Owatrol GLV marine aluminium paint\u003c\/h2\u003e\n\u003cp\u003eStir or shake the can well before and during use. Do not thin.\u003c\/p\u003e\n\u003ch3\u003eApplying Owatrol GLV to new steel \u0026amp; aluminimum\u003c\/h3\u003e\n\u003cp\u003ePrime new steel with 1 coat of \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/marine-oil\/\"\u003eMarine Oil\u003c\/a\u003e and allow to dry for 24 hours. Then apply 1 coat of Owatrol GLV. For new steel or aluminium that will be subject to aggressive climatic conditions a 2nd coat is advisable.\u003c\/p\u003e\n\u003ch3\u003eApplying Owatrol GLV to clean, lightly rusted or new unpainted rusty steel\u003c\/h3\u003e\n\u003cp\u003eApply 2 coats of Owatrol ALU allowing drying time between coats.\u003c\/p\u003e\n\u003ch3\u003eApplying Owatrol GLV to old or severely rusted surfaces\u003c\/h3\u003e\n\u003cp\u003eApply wet on wet applications of \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/marine-oil\/\"\u003eMarine Oil\u003c\/a\u003e until the rust is fully saturated and allow to dry. Saturation is indicated by a uniform glossy appearance to the surface when the \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/marine-oil\/\"\u003eMarine Oil\u003c\/a\u003e is dry. Next apply 2 coats of Owatrol GLV allowing drying time between coats.\u003c\/p\u003e\n\u003ch3\u003eApplying Owatrol GLV to previously coated surfaces\u003c\/h3\u003e\n\u003cp\u003eSpot prime all exposed metal with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/marine-oil\/\"\u003eMarine Oil\u003c\/a\u003e or 1 coat of Owatrol GLV depending on the severity of the rust and allow to dry. Next apply 2 coats of Owatrol GLV over the entire area; allowing drying time between coats.\u003c\/p\u003e\n\u003ch2\u003eMaintenance\u003c\/h2\u003e\n\u003cp\u003eMaintenance is easy and frequency will depend on the conditions that the coated surface is exposed to. Thoroughly clean all surfaces to be coated ensuring any oil, grease and other surface contaminants are removed. Remove all loose and flaking material and feather in any sharp edges. Then apply a single application of Owatrol GLV to all areas where exposed metal or rust is showing\u003cbr\u003ethrough and allow to dry. If desired a further application of Owatrol GLV may be applied to the entire surface.\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eClean all tools and equipment with mineral spirits while still wet. If allowed to dry, remove with paint stripper. Store and maintain equipment as directed by manufacturer.\u003c\/p\u003e\n\u003cp\u003eNOTE: Any rags, steel wool etc soaked in Owatrol GLV may spontaneously catch fire if improperly discarded. Rags, steel wool etc must be saturated with water after use or placed in a sealed, water filled metal container, before disposing with household waste.\u003c\/p\u003e\n\u003ch2\u003eThings to Remember\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover everything you do not wish to paint\u003c\/li\u003e\n\u003cli\u003eApply between 5°C and 35°C\u003c\/li\u003e\n\u003cli\u003eDo not apply in direct sunlight or on to hot surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"0.75 Litre","offer_id":39599467298984,"sku":"GK0293CLE0100","price":26.25,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre","offer_id":39599467331752,"sku":"GK0293CLE2000","price":76.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/marine-owatrol-glv.png?v=1617629663"},{"product_id":"owatrol-owayell-marine-gelcoat-and-metal-renovator","title":"Owatrol Owayell Marine Gelcoat and Metal Renovator","description":"\u003cp\u003eOwayell is a gelcoat and metal renovator which removes yellow staining, limescale and rust spots from gelcoat, stainless steel and other surfaces in a matter of minutes. It will brighten and whiten gelcoats as well as dissolve limescale, sea salt and water marks. Owayell will also disintegrate dirt caused by micro-organisms and barnacle\/shell residue and can be used to restore shine to stainless steel, anodised aluminium and chrome surfaces.\u003c\/p\u003e\n\u003cp\u003eOwayell is simple to use and is fact acting in just 5 to 10 minutes. It can also be used to passivate raw steel and aluminium in preparation for painting.\u003c\/p\u003e\n\u003ch2\u003eIdeal uses of Owayell gelcoat and metal renovator\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrightening a gelcoat with yellow staining\u003c\/li\u003e\n\u003cli\u003eRemoving barnacle or shell residue from boat hulls\u003c\/li\u003e\n\u003cli\u003eDissolving water marks and unsightly limescale residue\u003c\/li\u003e\n\u003cli\u003eRemoving streaks and rust traces from marine metal\u003c\/li\u003e\n\u003cli\u003eRestoring shine and removing rust spots from stainless steel\u003c\/li\u003e\n\u003cli\u003ePassivating steel in preparation for painting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplying Owatrol’s Owayell gelcoat renovator\u003c\/h2\u003e\n\u003cp\u003eShake container well before use and do not dilute. Apply Owayell to the surface to be treated using a brush, roller or cloth. Allow it to work for 5-10 minutes, there is no need to scrub the surface. Rinse with plenty of fresh, clean water, working from top to bottom. If required, repeat the process.\u003c\/p\u003e\n\u003cp\u003eFor surfaces heavily encrusted with limescale brush the surface with a nylon brush 10 minutes after applying the first application. Do not rinse, instead apply a second application and leave it again for 5-10 minutes before rinsing with plenty of clean water.\u003c\/p\u003e\n\u003ch2\u003eAdditional uses for Owayell\u003c\/h2\u003e\n\u003cp\u003eTo use Owayell as a liquid sander to passivate raw steel before painting first dilute 1 part Owayell to 5 parts water. Then apply the solution to the surface and leave it to work for 10 minutes. Rinse off before drying and immediately applying the finish.\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eClean all tools and equipment with water.\u003c\/p\u003e\n\u003ch2\u003eRestrictions\u003c\/h2\u003e\n\u003cp\u003eDo not use Owayell on galvanised metal or raw aluminium.\u003c\/p\u003e\n\u003ch2\u003eThings to Remember\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProtect surfaces you do not wish to be treated\u003c\/li\u003e\n\u003cli\u003eDo not apply to surfaces in direct sunlight during the hottest hours of the day\u003c\/li\u003e\n\u003cli\u003eLimit contact time to 5 minutes when applying to paint, varnish, lacquer or non-rusted steel\u003c\/li\u003e\n\u003cli\u003eAlways test on a small inconspicuous area first\u003c\/li\u003e\n\u003cli\u003eUse appropriate protective clothing – gloves, goggles…\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv data-canvas-width=\"654.8466666666667\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Owatrol","offers":[{"title":"1 Litre","offer_id":39599512813736,"sku":"GK0280CLE0100","price":21.87,"currency_code":"GBP","in_stock":true},{"title":"5 Litre","offer_id":39599512846504,"sku":"GK0280CLE0250","price":107.1,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/marine-owayell.png?v=1617630237"},{"product_id":"owatrol-blackbat-2-in-1-marine-hull-cleaner","title":"Owatrol Blackbat 2 in 1 Marine Hull Cleaner","description":"\u003cp\u003eBlackbat 2 in 1 (Previously known as Owablack), is a fast acting cleaner for fenders, vinyl, artificial leathers, inflatables, hulls, decks and more. Easy to use, Blackbat 2 in 1 removes tough marks and stains in just 5 minutes, restoring the surface to its original condition.\u003c\/p\u003e\n\u003cp\u003eBlackbat 2 in 1 is ready to use and is enriched with pine oil to provide optimum performance on oil residues. It does not affect the surface which is being cleaned.\u003c\/p\u003e\n\u003ch2\u003eIdeal uses of Blackbat 2 in 1\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCleaning exhaust fume stains from hulls and exhaust pipes\u003c\/li\u003e\n\u003cli\u003eDegreasing surfaces of your boat which have oil residue\u003c\/li\u003e\n\u003cli\u003eRemoving grease and dirt from artificial leather or vinyl surfaces\u003c\/li\u003e\n\u003cli\u003eRemoving tread marks from decks and steps\u003c\/li\u003e\n\u003cli\u003eCleaning marks and stains from anti-slip surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplying Owatrol’s Blackbat 2 in 1\u003c\/h2\u003e\n\u003cp\u003eApply Blackbat 2 in 1 to the surface using a brush or sprayer and allow to work for 5 minutes.\u003c\/p\u003e\n\u003cp\u003eThen rub surface with a clean cloth or scrubbing sponge and rinse with fresh clean water. Repeat process if required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTIP:\u003c\/strong\u003e For very dirty surfaces, soak a cloth or scrubbing sponge in Blackbat 2 in 1 and scrub on to surface in a circular motion. If surface is too hot, dampen with water to cool before applying Blackbat 2 in 1.\u003c\/p\u003e\n\u003ch2\u003eDilutions\u003c\/h2\u003e\n\u003cp\u003eUse as is – do not dilute.\u003c\/p\u003e\n\u003ch2\u003eClean up\u003c\/h2\u003e\n\u003cp\u003eClean all tools and equipment with water. Cloths and sponges soaked in Blackbat should be laid out flat to dry before disposing with the normal household waste.\u003c\/p\u003e\n\u003ch2\u003eThings to Remember\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDo not apply to surfaces in direct sunlight during the hottest hours of the day\u003c\/li\u003e\n\u003cli\u003eDo not use wire brushes to scrub he surface\u003c\/li\u003e\n\u003cli\u003eProtect surfaces you do not wish to treat\u003c\/li\u003e\n\u003cli\u003eAlways test on a small, inconspicuous area first\u003c\/li\u003e\n\u003cli\u003eUse appropriate protective clothing – gloves, goggles, etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cdiv data-canvas-width=\"654.8466666666667\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Owatrol","offers":[{"title":"0.5 Litre Spray Can","offer_id":39599546204328,"sku":"GK0280CLE0100","price":20.75,"currency_code":"GBP","in_stock":true},{"title":"1 Litre","offer_id":39599526215848,"sku":"GK0280CLE0100","price":23.34,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre","offer_id":39599526248616,"sku":"GK0280CLE0250","price":52.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Black-Bat-2in1-New.png?v=1617630411"},{"product_id":"owatrol-owaclean-boat-cleaner","title":"Owatrol Owaclean Boat Cleaner","description":"\u003cp\u003eOwaclean is a concentrated, solvent and acid free cleaner for the regular maintenance of hulls, decks and other marine surfaces. This waterbased all-purpose cleaner removes dirt, grease and other surface contaminants but is non-aggressive and so will not damage the surface.\u003c\/p\u003e\n\u003cp\u003eOwaclean’s concentrated formula makes it highly economical and it’s quick and easy to use. It can remove many substances including mould and is residue and smear free after rinsing.\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for Owaclean hull and deck cleaner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKeeping your boat deck looking at its best\u003c\/li\u003e\n\u003cli\u003eRemoving mould marks from corners and crevices\u003c\/li\u003e\n\u003cli\u003eCleaning general dirt from boat hulls\u003c\/li\u003e\n\u003cli\u003eMaintaining your gelcoat\u003c\/li\u003e\n\u003cli\u003eKeeping fixtures and fittings on your boat clean\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplying Owaclean hull and deck cleaner\u003c\/h2\u003e\n\u003cp\u003eMake up a diluted solution as dictated by the level of surface contamination (see dilution instructions below for more information). Stir or shake the solution well to ensure that the Owaclean is well mixed in.\u003c\/p\u003e\n\u003cp\u003eApply the diluted Owaclean solution to the surface using a brush, sponge, roller or pump sprayer and leave it to work for 10 minutes. Do not allow the solution to dry on the surface whilst working.\u003c\/p\u003e\n\u003cp\u003eRinse the surface with fresh clean water using a hose, power washer or bucket and sponge (change the water regularly). The use of a power washer will ensure better dirt removal.\u003c\/p\u003e\n\u003cp\u003eAfter cleaning, check the surface is clean by spraying on water. If water droplets form the surface is not clean and the process should be repeated.\u003c\/p\u003e\n\u003ch2\u003eDilutions for Owaclean\u003c\/h2\u003e\n\u003cp\u003eAdjust the dilution according to the degree of surface contamination.\u003c\/p\u003e\n\u003cp\u003eAs a guide:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirty surfaces: 1 part Owaclean to 20 parts water\u003c\/li\u003e\n\u003cli\u003eVery dirty surfaces: 1 part Owaclean to 10 parts water\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOwaclean is a concentrated formla. \u003cstrong\u003eDo not use undiluted.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eClean all tools and equipment with fresh water.\u003c\/p\u003e\n\u003ch2\u003eThings to remember\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover everyhing you do not wish to clean\u003c\/li\u003e\n\u003cli\u003eApply betwen 10°C and 25°C\u003c\/li\u003e\n\u003cli\u003eDo not apply in direct sunlight or to hot surfaces\u003c\/li\u003e\n\u003cli\u003eWhen applying by spray, adjust nozzle to prevent formation of a mist\u003c\/li\u003e\n\u003cli\u003eAlways test on a small inconspicuous area first\u003c\/li\u003e\n\u003cli\u003eUse appropriate protective clothing – gloves, goggles, etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cdiv data-canvas-width=\"654.8466666666667\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Owatrol","offers":[{"title":"1 Litre","offer_id":39599550988456,"sku":"GK0280CLE0100","price":18.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/marine-owaclean.png?v=1617630633"},{"product_id":"owatrol-owanett-boat-engine-degreaser","title":"Owatrol Owanett Boat Engine Degreaser","description":"\u003cp\u003eOwanett is an engine and bilge degreaser which cleans and unclogs and leaves no greasy deposit after rinsing. It is a concentrated formula which dissolves and removes grease, mineral oils and fats from dirt encrusted motors.\u003c\/p\u003e\n\u003cp\u003eOwanett is perfect for removal of accidental oil spills and hydrocarbons that cannot be collected. It is also a concentrated formula making it highly economical.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote: Use only the recommended dilutions. Do not use undiluted.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for Owanett\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePerfect for use on bilges, engines, mechanical parts\u003c\/li\u003e\n\u003cli\u003eAlso suitable for hulls and deck\u003c\/li\u003e\n\u003cli\u003eCleaning and degreasing motors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProtect surfaces you do not wish to treat.\u003c\/li\u003e\n\u003cli\u003eAlways test on a small inconspicuous area first.\u003c\/li\u003e\n\u003cli\u003eUse appropriate protective clothing – gloves \u0026amp; goggles.\u003c\/li\u003e\n\u003cli\u003eWhen applying by spray, adjust nozzle to prevent formation of a mist.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDO NOT\u003c\/strong\u003e use undiluted.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMake up diluted solution as dictated by the surface contamination.\u003c\/li\u003e\n\u003cli\u003eStir or shake solution well to ensure Owanett is well mixed in.\u003c\/li\u003e\n\u003cli\u003eApply diluted Owanett to surface using brush, sponge or pump sprayer.\u003c\/li\u003e\n\u003cli\u003eGently agitate treated surface.\u003c\/li\u003e\n\u003cli\u003eAllow to work 10 minutes (MAX).\u003c\/li\u003e\n\u003cli\u003eRinse surface with fresh clean water using a hose, power washer or bucket and sponge (change water regularly).\u003c\/li\u003e\n\u003cli\u003eIf required repeat process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eWater\u003c\/p\u003e\n\u003ch2\u003eStorage\u003c\/h2\u003e\n\u003cp\u003eKeep from freezing and high temperatures. Close container tightly after use. Store left over product in original container. Store in cool, dry place.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cdiv data-canvas-width=\"654.8466666666667\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Owatrol","offers":[{"title":"1 Litre","offer_id":39599583199400,"sku":"GK0280CLE0100","price":20.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/OwatrolMarine_Owanett_1L.png?v=1617630788"},{"product_id":"owatrol-owataud-boat-canvas-cleaner","title":"Owatrol Owataud Boat Canvas Cleaner","description":"\u003cp\u003eFast acting and easy to use, Owataud cleans and degreases surfaces furnishings without damaging or altering it. It removes dirt, grease, marks and stains caused by pollution, exhaust fumes and more.\u003c\/p\u003e\n\u003cp\u003eOwataud can be used on sails, awnings, covers and biminis, as well as seating with artificial leather and vinyl. It is also suitable for use on fabric, however, we recommend testing on a small inconspicuous area first. Fast acting and easy to use, you can notice fantastic results in just 5 minutes.\u003c\/p\u003e\n\u003cp\u003eUse along side \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/owaclean\/\"\u003eOwaclean\u003c\/a\u003e to ensure an all over clean boat.\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for Owataud\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFor exterior use.\u003c\/li\u003e\n\u003cli\u003eIdeal for use on seating and cushions made of vinyl and artificial leather.\u003c\/li\u003e\n\u003cli\u003eCleans sails, covers, dodgers, biminis, glass and PVC.\u003c\/li\u003e\n\u003cli\u003eCan also be used on fabric surfaces (test on a small area first).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDo not apply in direct sunlight or to hot surfaces.\u003c\/li\u003e\n\u003cli\u003eApply between 10°C (50°F) and 30°C (86°F).\u003c\/li\u003e\n\u003cli\u003eDo not use wire brushes to scrub the surface.\u003c\/li\u003e\n\u003cli\u003eProtect surfaces you do not wish to treat.\u003c\/li\u003e\n\u003cli\u003eAlways test on a small inconspicuous area first.\u003c\/li\u003e\n\u003cli\u003eUse appropriate protective clothing – Gloves, Goggles etc\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eApply Owataud to the surface using a brush or sprayer.\u003c\/li\u003e\n\u003cli\u003eAllow to work for 5 minutes.\u003c\/li\u003e\n\u003cli\u003eRub the surface with a clean cloth or scrubbing sponge.\u003c\/li\u003e\n\u003cli\u003eRinse with fresh clean water.\u003c\/li\u003e\n\u003cli\u003eRepeat process if required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eTIP: For very dirty surfaces soak cloth or scrubbing sponge in Owataud and scrub on to surface in a circular motion. If surface is too hot, dampen with water to cool before applying Owataud.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eWater\u003c\/p\u003e\n\u003cp\u003eNote: Cloths soaked in Owataud should be laid out flat to dry before disposing\u003c\/p\u003e\n\u003ch2\u003eStorage\u003c\/h2\u003e\n\u003cp\u003eStore leftover product in the original container. Close lid tightly after use. Keep from freezing and high temperatures\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cdiv data-canvas-width=\"654.8466666666667\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Owatrol","offers":[{"title":"1 Litre","offer_id":39599595421864,"sku":"GK0280CLE0100","price":25.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/OwatrolMarine_OWATAUD_1L.png?v=1617630902"},{"product_id":"owatrol-teak-olje-teak-oil","title":"Owatrol Teak Olje - Teak Oil","description":"\u003cp\u003eTeak-Olje is a blend of \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/owatrol-oil\/\" target=\"_blank\"\u003eOwatrol Oil\u003c\/a\u003e and high-quality teak oil for Teak and other exotic hardwoods. Protecting and enhancing the natural beauty of the wood, Teak Olje is a deep penetrating, clear oil that gives a rich warm appearance to any treated wood surface. Suitable for both inside and outside use, Teak-Olje replaces the natural oils lost by exterior wood in the weathering process and will not blacken when exposed to UV rays making it ideal for garden furniture.\u003c\/p\u003e\n\u003cp\u003eAs a saturating oil, Teak-Olje protects and nourishes the wood from within its pores rather than forming a film on the surface which means that it will not peel or flake. It is easy to maintain with no sanding or stripping required and gives a rich, matt finish.\u003c\/p\u003e\n\u003ch2\u003eIdeal Uses for Teak-Olje\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProtecting outdoor furniture against UV damage\u003c\/li\u003e\n\u003cli\u003eEnhancing the natural beauty of exotic hardwoods\u003c\/li\u003e\n\u003cli\u003ePenetrating into dense and oily woods\u003c\/li\u003e\n\u003cli\u003eProtecting interior hardwood surfaces\u003c\/li\u003e\n\u003cli\u003eShowcasing high-quality woods with clear teak oil protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation for Teak Olje\u003c\/h2\u003e\n\u003ch3\u003eGeneral Directions\u003c\/h3\u003e\n\u003cp\u003eSurfaces must first be thoroughly clean, dry and free of dirt, grease, grime, mildew and previous coatings. Treat any mildew with a 50\/50 bleach\/water solution. Scrub the solution onto the surface and leave it to stand for 10-15 minutes before rinsing thoroughly. After stripping and cleaning allow 2-3 days for the wood to fully dry out before applying the finish.\u003c\/p\u003e\n\u003cp\u003eTeak-Olje may only be applied to bare wood surfaces or a wood surface previously finished with Teak-Olje. \u003cstrong\u003eALL\u003c\/strong\u003e other finishes must be completely and thoroughly removed. If necessary sand the surface after cleaning and\/or stripping (80 grit paper).\u003c\/p\u003e\n\u003ch3\u003eNew wood surfaces\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eInterior\u003c\/strong\u003e – sand the wood with 100 grit paper to open the pores, dust off and then degrease the surface with methylated spirits (denatured alcohol).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExterior \u003c\/strong\u003e– Prepare as for interior wood OR treat the surface with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/aquanett\/\" target=\"_blank\"\u003eAquanett\u003c\/a\u003e and then neutralise with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/net-trol\/\" target=\"_blank\"\u003eNet-Trol\u003c\/a\u003e. New wood surfaces have a hard shiny surface called mill glaze that prevents maximum penetration and bonding of any finish and this should be removed before starting the application. Sanding or treating the wood with \u003ca href=\"https:\/\/www.owatrolusa.com\/product\/aquanett\/\" target=\"_blank\"\u003eAquanett\u003c\/a\u003e removes this, ensuring maximum performance of the finish.\u003c\/p\u003e\n\u003cp\u003eFor Iroko, Padouk and Keruing please see restrictions.\u003c\/p\u003e\n\u003ch3\u003eWeathered wood surfaces (untreated)\u003c\/h3\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/net-trol\/\" target=\"_blank\"\u003eClean weathered wood with Net-Trol\u003c\/a\u003e to remove loose wood fibres, dirt and other surface contaminants. If the wood is severely contaminated, clean first with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/aquanett\/\" target=\"_blank\"\u003eAquanett\u003c\/a\u003e and then neutralise with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/net-trol\/\" target=\"_blank\"\u003eNet-Trol\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003ePreviously oiled surfaces\u003c\/h3\u003e\n\u003cp\u003eAll other oils or sealers must be completely and thoroughly removed with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/aquanett\/\" target=\"_blank\"\u003eAquanett\u003c\/a\u003e and the stripped surface neutralised with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/net-trol\/\" target=\"_blank\"\u003eNet-Trol\u003c\/a\u003e before applying Teak-Olje.\u003c\/p\u003e\n\u003ch3\u003ePreviously coated surfaces (paint, stain, varnish, waterproofers…)\u003c\/h3\u003e\n\u003cp\u003eAll previous coatings must be completely and thoroughly removed with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/prepdeck\/\" target=\"_blank\"\u003ePrepdeck\u003c\/a\u003e, and the stripped surface \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/net-trol\/\" target=\"_blank\"\u003eneutralised with Net-Trol\u003c\/a\u003e before applying Teak Olje.\u003c\/p\u003e\n\u003cp\u003e*Woods high in tannins such as teak, iroko, merbau and oak may darken when stripping with Aquanett and Dilunett. Neutralising with Net-Trol will lighten and restore the colour.\u003c\/p\u003e\n\u003ch2\u003eApplication of Teak-Olje Premium Hardwood Oil\u003c\/h2\u003e\n\u003cp\u003eApply 2 even applications of Teak-Olje, ‘wet-on-wet’. To do this, first apply the initial coat and allow it to penetrate (normally 15-30 minutes). At this point apply the second coat and allow this to penetrate. If necessary, apply more coats following the same process until the wood is ‘saturated’ and will take no more oil.\u003c\/p\u003e\n\u003cp\u003eDo not allow the Teak-Olje to become touch dry between applications, work in sections for larger projects to ensure this. Brush out or wipe up any excess Teak-Olje with a lint-free cloth 15-20 minutes after the last application to avoid shiny spots.\u003c\/p\u003e\n\u003cp\u003eNote: Teak-Olje is not a surface coating, its place is in the wood and not on the surface. Teak-Olje protects by penetrating the wood, providing a rich, matt finish.\u003c\/p\u003e\n\u003ch2\u003eMaintenance\u003c\/h2\u003e\n\u003cp\u003eTeak-Olje will gradually lighten over time due to exposure to the sun and UV rays. When the wood has taken on an un-oiled appearance or has lightened to a light grey colour, it is time for a maintenance application. Clean the surface with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/net-trol\/\" target=\"_blank\"\u003eNet-Trol\u003c\/a\u003e and allow it to fully dry. Then apply Teak-Olje wet-on-wet until the wood is saturated and the finish restored, usually, 1 or 2 applications will be sufficient.\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eClean all tools and equipment with white spirits while still wet. If the product has dried use paint stripper to remove it.  Any rags, steel wool etc soaked in Teak-Olje may spontaneously catch fire if improperly discarded. Rags, steel wool etc. must be saturated with water after use or placed in a sealed, water-filled metal container, before disposing with household waste\u003c\/p\u003e\n\u003ch2\u003eRestrictions\u003c\/h2\u003e\n\u003cp\u003eThe tannins and natural oils in woods such as Keruing, Iroko and Padouk impede the penetration and drying of finishes. These species of wood should be thoroughly prepared or allowed to weather for 12 months before applying Teak-Olje. Contact us for preparation advice.\u003c\/p\u003e\n\u003ch2\u003eThings to Remember\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse as is, do not thin.\u003c\/li\u003e\n\u003cli\u003eShake or stir can thoroughly before application.\u003c\/li\u003e\n\u003cli\u003eCover everything you do not wish to coat, including plants and shrubs.\u003c\/li\u003e\n\u003cli\u003eApply between 5°C and 35°C.\u003c\/li\u003e\n\u003cli\u003eDo not apply if cold and\/or wet weather is expected within 24 hours.\u003c\/li\u003e\n\u003cli\u003eAlways work the entire length of the piece of wood being oiled to a logical break.\u003c\/li\u003e\n\u003cli\u003eVertical surfaces should be coated from top to bottom.\u003c\/li\u003e\n\u003cli\u003eNever stop application in the middle of a piece of wood.\u003c\/li\u003e\n\u003cli\u003eNever apply in direct sunlight or to hot surfaces.\u003c\/li\u003e\n\u003cli\u003eDo not allow to dry between coats – apply Teak-Olje ‘wet on wet’.\u003c\/li\u003e\n\u003cli\u003eAfter spray application, always back-brush or back-roll to improve penetration and uniformity of coverage.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"0.5 Litre","offer_id":39599718564008,"sku":"GK0293CLE2000","price":16.85,"currency_code":"GBP","in_stock":true},{"title":"1 Litre","offer_id":39599718498472,"sku":"GK0293CLE0100","price":30.13,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre","offer_id":39599718531240,"sku":"GK0293CLE0250","price":71.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Teak-Oil-1L.png?v=1617631708"},{"product_id":"owatrol-renoclear-bleaching-agent-for-cleaning-and-brightening-wood","title":"Owatrol Renoclear - Bleaching agent for cleaning and brightening wood","description":"\u003cp\u003eRenoclear is a bleaching agent for brightening and restoring an even appearance to wood surfaces that have discolouration or dark patches.\u003c\/p\u003e\n\u003cp\u003eRenoclear is perfect for use on things such as natural ageing of the wood, surrounding pollution from things such as sap staining, as well as lightening the staining due to Blue Stain Fungi.\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for Renoclear\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLightens discolouration and\/or darkening of the wood due to natural staining and ageing\u003c\/li\u003e\n\u003cli\u003eLightens discolouration and\/or darkening due to Blue Stain Fungi\u003c\/li\u003e\n\u003cli\u003eEliminates marks due to tannin streaks\u003c\/li\u003e\n\u003cli\u003eEffective on all types of modified wood\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eAll previous coatings must be completely and thoroughly removed.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOils and sealers:\u003c\/strong\u003e Strip with Aquanett or Prepdeckthen neutralise with Net-Trol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolvent (oil or alkyd based finishes):\u003c\/strong\u003e Strip with Dilunett then neutralise with Net-Trol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcrylic finishes (Water-based):\u003c\/strong\u003e Strip with Prepdeck then neutralise with Net-Trol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther finishes i.e. 2 pack epoxies, urethanes etc:\u003c\/strong\u003e Strip with DSP 800 then clean the surface to remove residual paraffin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Hardwoods and woods rich in tannins e.g. Oak, Chestnut, Douglas Fir, Cedar, etc. may darken with Aquanett, Prepdeck and Dilunett, neutralising with Net-Trol immediately after rinsing will lighten and restore the woods colour.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eAfter completing the initial preparation process allow wood to fully dry (Min 24 hours).\u003c\/p\u003e\n\u003cp\u003eInspect the dried wood. If the dry wood shows discolouration, dark patches or signs of Blue Stain Fungi staining proceed as directed in “Application” below.\u003c\/p\u003e\n\u003ch2\u003eApplication of Renoclear\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse as is – Do not dilute\u003c\/li\u003e\n\u003cli\u003eEnsure surface is fully dry.\u003c\/li\u003e\n\u003cli\u003eApply an even application of Renoclear. If applying by garden sprayer use a plastic spray nozzle and brush or roll over after application to aid penetration.\u003c\/li\u003e\n\u003cli\u003eAllow Renoclear to work 6 to 24 hours depending on the severity of the staining.\u003c\/li\u003e\n\u003cli\u003eDo \u003cstrong\u003enot\u003c\/strong\u003e rinse or wet the surface prior to the next step.\u003c\/li\u003e\n\u003cli\u003eApply \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/soapclean\/\"\u003eSopclean\u003c\/a\u003e diluted 1:4.\u003c\/li\u003e\n\u003cli\u003eScrub surface with a deck brush and leave to work 5 minutes.\u003c\/li\u003e\n\u003cli\u003eRinse with plenty of fresh, clean water.\u003c\/li\u003e\n\u003cli\u003eAllow the wood to dry, 2 to 3 good drying days or until it has reached a moisture content of 18% or less before applying the finish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/em\u003e For difficult stains it may be necessary to repeat the procedure. The final result of Renoclear will not be seen until the surface is fully dry.\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eClean all tools used with soap and water.\u003c\/p\u003e\n\u003ch2\u003eThings to Remember\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover and protect everything you do not wish to treat, paying particular attention to any metalwork (coated or un-coated), aluminium, painted surfaces, plants, shrubs, lawns etc\u003c\/li\u003e\n\u003cli\u003eDo not mix Renoclear with any other product\u003c\/li\u003e\n\u003cli\u003eApply between 10°C (50°F) and 30°C (86°F). RH \u0026lt;70%\u003c\/li\u003e\n\u003cli\u003eDo not apply in direct sunlight or to hot surfaces\u003c\/li\u003e\n\u003cli\u003eDo not apply if cold and\/or wet weather is expected within 24 hours\u003c\/li\u003e\n\u003cli\u003eDo not apply by garden sprayer in windy conditions.\u003c\/li\u003e\n\u003cli\u003eAvoid contact with all metal.\u003c\/li\u003e\n\u003cli\u003eNot suitable for decorative stone and materials containing iron oxides\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"5 Litre","offer_id":42423293706483,"sku":"GK0619CLE0250","price":79.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/renoclear-packagin.png?v=1644493493"},{"product_id":"owatrol-stan-protect-clear-penetrating-tannin-bleed-and-staining-blocker","title":"Owatrol Stan Protect Clear penetrating tannin bleed and staining blocker","description":"\u003cp\u003eStan Protect is a clear, penetrating tannin blocker that prevents the bleeding and leaching of tannins from woods’ high in extractives and also the discolouration of finishes on interior softwoods.\u003c\/p\u003e\n\u003cp\u003eForming a barrier within the wood, Stan Protect blocks the tannins, preventing them from reaching the surface where they will discolour a finish or stain.\u003c\/p\u003e\n\u003ch2\u003eWhy use Stan Protect?\u003c\/h2\u003e\n\u003cp\u003eStan Protect prevents discoloration of finishes caused by tannin bleed\/staining and also extends the life of a finish. It improves penetration and opacity of finishes and prevents premature aesthetic and physical degradation of the finish.\u003c\/p\u003e\n\u003ch2\u003eIdeal Uses for Owatrol’s Stan Protect\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eExterior and interior, vertical or horizontal wooden surfaces\u003c\/li\u003e\n\u003cli\u003eCan be used on new or old un-coated wood\u003c\/li\u003e\n\u003cli\u003eUse before application of opaque or semi-transparent stains\u003c\/li\u003e\n\u003cli\u003eRecommended for woods high in tannin such as cedar, American redwood, oak, chestnut etc\u003c\/li\u003e\n\u003cli\u003eUse on shingles, cladding, chalets, skirting boards, doors and more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eGeneral Directions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSurfaces must be clean, dry and free of dirt, grease, grime, mildew and previous coatings.\u003c\/li\u003e\n\u003cli\u003eTreat mildew with a 50\/50 bleach\/water solution. Scrub solution on to surface and allow to stand for 10 to 15 minutes; rinse thoroughly.\u003c\/li\u003e\n\u003cli\u003eAfter cleaning and\/or stripping, allow wood to dry 2 to 3 good drying days or until it has reached a moisture content of 18 % or less before applying Stan Protect.\u003c\/li\u003e\n\u003cli\u003eStan Protect can only be applied to bare wood surfaces. \u003cstrong\u003eAll\u003c\/strong\u003e other finishes \u003cstrong\u003emust\u003c\/strong\u003e be completely and thoroughly removed.\u003c\/li\u003e\n\u003cli\u003eIf necessary, sand surface after cleaning and\/or stripping (80 grit or coarser depending on wood species).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNew wood surfaces:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTest wood for absorbency by sprinkling water on the surface. If water is absorbed quickly, the grain is sufficiently “open” and the surface is ready for finishing, proceed to ‘Application’.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf water is not absorbed then proceed as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTreat wood with Aquanett or Prepdeck, neutralise with Net-Trol, alternatively mechanically or manually abrade surface with 80 grit paper or coarser depending on wood species.\u003c\/li\u003e\n\u003cli\u003eClean and dust off to remove all loose wood particles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWeathered wood surfaces (untreated):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWood that has weathered longer than 12 months or turned grey should be cleaned with Net-Trol to remove all loose wood fibres, dirt and other surface contaminants.\u003c\/li\u003e\n\u003cli\u003eIf wood is severely contaminated, clean with Aquanett or Prepdeck and neutralise with Net-Trol.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePreviously treated surfaces (oiled, paint, stain, varnish etc):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll previous finishes must be completely and thoroughly removed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOils and sealers:\u003c\/strong\u003e Strip with Aquanett or Prepdeck, neutralise with Net-Trol.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSolvent (oil or alkyd based finishes):\u003c\/strong\u003e Strip with Dilunett, neutralise with Net-Trol.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic finishes (Water-based):\u003c\/strong\u003e Strip with Prepdeck, neutralise with Net-Trol.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther finishes e.g. 2 pack epoxies, urethanes etc :\u003c\/strong\u003e Strip with DSP 800, neutralise surface with a suitable solvent – Acetone, White Spirits, Methylated Spirits etc\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNB\u003c\/strong\u003e – Hardwoods inc. exotic hardwoods and woods rich in tannins i.e. Cedar, Douglas Fir, Teak, Ipe, Iroko etc may darken with Aquanett, Prepdeck and Dilunett, neutralising with \u003ca href=\"https:\/\/www.owatroldirect.co.uk\/product\/net-trol\/\"\u003eNet-Trol\u003c\/a\u003e immediately after rinsing will lighten and restore the woods colour.\u003c\/p\u003e\n\u003ch2\u003eApplication of Stan Protect\u003c\/h2\u003e\n\u003ch3 align=\"left\"\u003eApplication tools\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePaintbrush, roller, sprayer or dipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNB\u003c\/strong\u003e – If you apply the product with a sprayer, it is a good idea to go over it lightly with a brush or roller afterwards for better penetration.\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cp\u003eUse as is – do not dilute. Shake or stir can well before use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll woods – New, Cleaned or Stripped\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrush, Roller, Spray;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply one liberal, even, saturating application to all wood surfaces.\u003c\/li\u003e\n\u003cli\u003eSoak in to end grain including any cut, bored or notched ends.\u003c\/li\u003e\n\u003cli\u003eAllow to dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDipping;\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSoak wood for 10 minutes.\u003c\/li\u003e\n\u003cli\u003eDrain off excess Stan Protect.\u003c\/li\u003e\n\u003cli\u003eAllow to dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNB\u003c\/strong\u003e – If the over coating of Stan Protect exceeds 48 hours, lightly sand surface with 80 grit paper and thoroughly dust off before applying the finish\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eClean all tools with soap and water immediately after use.\u003c\/p\u003e\n\u003ch2\u003eThings to Remember\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover and protect everything you do not wish to coat, including plants and shrubs.\u003c\/li\u003e\n\u003cli\u003eApply between 10°C (50°F) and 30°C (86°F).\u003c\/li\u003e\n\u003cli\u003eDo not apply in direct sunlight or to hot surfaces. Wood surfaces in direct sunlight can reach temperatures of 60˚C (140°F) even when the air temperature is 30˚C (86°F).\u003c\/li\u003e\n\u003cli\u003eDo not apply if cold and\/or wet weather is expected within 24 hours.\u003c\/li\u003e\n\u003cli\u003eVertical cladding should be coated from top to bottom.\u003c\/li\u003e\n\u003cli\u003eAfter spray application, always back-brush or back-roll to improve penetration and uniformity of coverage.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"1 Litre","offer_id":42423327654131,"sku":"GK0280CLE0100","price":43.83,"currency_code":"GBP","in_stock":false},{"title":"5 Litre","offer_id":42423327686899,"sku":"GK0280CLE0250","price":147.09,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Web-Ready-Stan-Protect-1L.png?v=1644494426"},{"product_id":"owatrol-h4-wood-stone-colourless-waterproof-protection-for-softwood-and-hardwood","title":"Owatrol H4 Wood \u0026 Stone Colourless waterproof protection for softwood and hardwood","description":"\u003cp\u003eH4 Wood \u0026amp; Stone is a colourless, waterproof protection for wood and stone. It allows wood to age naturally and turn grey without damage from water, pollution, moss and dirt. Perfect if you like the natural look of wood as it turns grey but are anxious to prevent damage such as splitting and cracking which will happen if wood is left untreated.\u003c\/p\u003e\n\u003cp\u003eH4 Wood \u0026amp; Stone is hydrophobic and therefore water repellent, it is completely clear and will have no effect on the colour or appearance of the surface being treated. It is silicone-free and helps to prevent environmental attack including from mould and water.\u003c\/p\u003e\n\u003cp\u003eH4 Wood \u0026amp; Stone can also be added to water-based finishes (such as paint or stain) to enhance their water repellent characteristics and optimise performance. Simply add 10 – 20% to the finish.\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for Owatrol’s H4 Wood \u0026amp; Stone\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaintaining and protecting wood that has greyed naturally\u003c\/li\u003e\n\u003cli\u003eMaintaining and protecting stone, cement, plaster, limestone, marble etc.\u003c\/li\u003e\n\u003cli\u003eAllowing new wood to age naturally whilst still protecting it\u003c\/li\u003e\n\u003cli\u003eKeeping a natural look to fencing\u003c\/li\u003e\n\u003cli\u003eAdd to water-based finishes to enhance their water repellent characteristics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eSurfaces must first be clean, dry and free of dirt, grease, grime, mildew and previous coatings. Treat any mildew with a 50\/50 bleach\/water solution. Scrub the solution on to the surface and allow it to stand for 10- 15 minutes before rinsing thoroughly.\u003c\/p\u003e\n\u003cp\u003eAfter cleaning with Net-Trol and\/or stripping with Prepdeck, allow the wood to dry for 2-3 good drying days or until it has reached a moisture content of 18% or less before applying the finish.\u003c\/p\u003e\n\u003cp\u003eH4 Wood \u0026amp; Stone can only be applied to bare wood surfaces or weathered surfaces previously finished with H4 Wood. H4 Wood may also be applied to surfaces previously finished with Owatrol penetrating products including Textrol and Aquadecks without the need for stripping. Contact us for additional information and advice before proceeding. \u003cstrong\u003eALL\u003c\/strong\u003e other finishes \u003cstrong\u003eMUST\u003c\/strong\u003e be completely and thoroughly removed. If necessary sand surface after cleaning and\/or stripping (80 grit paper).\u003c\/p\u003e\n\u003ch3\u003eNew wood surfaces\u003c\/h3\u003e\n\u003cp\u003eTest wood for absorbency by sprinkling water on the surface. If water is absorbed quickly, the grain is sufficiently ‘open’ and the surface is ready for finishing, proceed to Application. If the water is not absorbed then proceed as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTreat wood with Aquanett or dilute Prepdeck\u003c\/li\u003e\n\u003cli\u003eThen neutralise with Net-Trol\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlternatively mechanically or manually abrade surface with 80 grit paper and then clean and dust off to remove all loose wood particles.\u003c\/p\u003e\n\u003ch3\u003eWeathered wood surfaces (untreated)\u003c\/h3\u003e\n\u003cp\u003eTo keep the grey look of the wood clean with a light detergent. To restore colour of wood clean with undiluted Net-Trol to remove all loose wood fibres, dirt and other surface contamination.\u003c\/p\u003e\n\u003ch3\u003ePreviously coated surfaces\u003c\/h3\u003e\n\u003cp\u003eAll previous coatings must be completely and thoroughly removed.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOils and sealers: Strip with Aquanett or Prepdeck then neutralise with Net-Trol\u003c\/li\u003e\n\u003cli\u003eSolvent (oil or alkyd-based finishes): Strip with Dilunett then neutralise with Net-Trol\u003c\/li\u003e\n\u003cli\u003eAcrylic finishes (Water-based): Strip with Prepdeck then neutralise with Net-Trol\u003c\/li\u003e\n\u003cli\u003eOther finishes i.e. 2 pack epoxies, urethanes: Strip with DSP 800 then clean the surface to remove residual paraffin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: Hardwoods and woods rich in tannins e.g. Oak, Chestnut, Douglas Fir, Cedar, etc. may darken with Aquanett, Prepdeck and Dilunett, neutralising with Net-Trolimmediately after rinsing will lighten and restore the wood’s colour.\u003c\/p\u003e\n\u003ch2\u003eApplication of Owatrol’s H4 Wood \u0026amp; Stone\u003c\/h2\u003e\n\u003cp\u003eApply a generous, even application of H4 Wood \u0026amp; Stone and allow it to dry for 24 hours.\u003c\/p\u003e\n\u003cp\u003eWhen H4 Wood \u0026amp; Stone is fully dry conduct water drop test by sprinkling water on the surface. If water beads the surface is properly protected. If water does not bead, apply another generous application of H4 Wood \u0026amp; Stone to ensure full protection.\u003c\/p\u003e\n\u003ch2\u003eMaintenance\u003c\/h2\u003e\n\u003cp\u003ePrior to applying a maintenance application conduct the water drop test as mentioned above to confirm if maintenance is required.\u003c\/p\u003e\n\u003cp\u003eWhen maintenance is required, clean the surface with Net-Trol and allow the surface adequate time to dry.\u003c\/p\u003e\n\u003cp\u003eApply H4 Wood \u0026amp; Stone as directed above. To maintain optimum protection re-apply H4 Wood \u0026amp; Stone at the following intervals:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVertical surfaces once every 12 months\u003c\/li\u003e\n\u003cli\u003eHorizontal surfaces once every 6 months\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Due to the density of exotic hardwoods e.g. Ipe, Teak, Iroko, etc. maintenance on vertical surfaces should be conducted once every 6 months and on horizontal surfaces once every 3 months.\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eClean all tools and equipment with soap and water immediately after use.\u003c\/p\u003e\n\u003ch2\u003eThings to Remember\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover everything you do not wish to coat, including plants and shrubs.\u003c\/li\u003e\n\u003cli\u003eDo not apply in direct sunlight or to hot surfaces.\u003c\/li\u003e\n\u003cli\u003eSurfaces in direct sunlight can reach temperatures of 60°C even when the air temperature is 30°C.\u003c\/li\u003e\n\u003cli\u003eDo not apply if cold and\/or wet weather is expected within 24 hours.\u003c\/li\u003e\n\u003cli\u003eDo not thin.\u003c\/li\u003e\n\u003cli\u003eAlways work the entire length of a board or piece of wood to a logical break.\u003c\/li\u003e\n\u003cli\u003eNever stop application in the middle of a board or piece of wood.\u003c\/li\u003e\n\u003cli\u003eAfter spray application, always back-brush or back-roll to improve penetration and uniformity of coverage.\u003c\/li\u003e\n\u003cli\u003eEnsure wood is dry – max 18% moisture content.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"1 Litre","offer_id":42423351378163,"sku":"GK0280CLE0100","price":26.06,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre","offer_id":42423351410931,"sku":"GK0280CLE0250","price":57.35,"currency_code":"GBP","in_stock":true},{"title":"10 Litre","offer_id":42423351443699,"sku":"GK0280CLE1500","price":209.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Web-Ready-H4-Wood-and-Stone1L.png?v=1644494894"},{"product_id":"owatrol-oxid-vernis-oxid-vernis-is-a-single-pack-clear-varnish-for-use-on-new-or-oxidised-metals","title":"Owatrol Oxid Vernis single pack clear varnish, for use on new or oxidised metals","description":"\u003cp\u003eOxid Vernis is a single pack clear varnish, enriched with polyurethane-modified alkyd resins for use on new or oxidised metals that have previously been treated with Owatrol Oil and where the natural look of the surface is to be maintained. Combining performance with ease of application, Oxid Vernis is long-lasting, has high UV resistance and is especially adapted for harsh climates.\u003c\/p\u003e\n\u003cp\u003eOxid Vernis is perfect for use on interior and exterior metals such as gates, furniture, fences, ornaments etc and can be used on horizontal or vertical surfaces with ease, whilst maintaining the natural appearance of the substrate.\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for Oxid Vernis\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDecorates, Protects, Weatherproofs – High UV resistance.\u003c\/li\u003e\n\u003cli\u003eGreat for use on new or oxidised surfaces – Ferrous and non-ferrous metals.\u003c\/li\u003e\n\u003cli\u003eIdeal for highly humid interior environments.\u003c\/li\u003e\n\u003cli\u003eExpands and contracts with the structure – No peeling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eSurfaces must be clean, dry and free of all grease, oil, salt and other surface contamination. Use an appropriate solvent depending on the substrate and contamination e.g. Acetone or Owaclean, to clean the surface prior to any of the following preparation processes. Round off any sharp edges to allow better film build.\u003c\/p\u003e\n\u003ch3\u003eFerrous Metals (New or Rusted):\u003c\/h3\u003e\n\u003cp\u003eRemove all traces of mill scale, rust, rust scale and other foreign matter by blasting, grinding or mechanical abrasion. Remove all blast or manual preparation residue by vacuum cleaner, air blower or stiff clean brush.\u003c\/p\u003e\n\u003cp\u003eIf required and desired wipe over surface with a cloth soaked in a fast flash off solvent e.g. Acetone (NOT White Spirit) to remove any remaining dust residue.\u003c\/p\u003e\n\u003cp\u003eAllow surface to dry.\u003c\/p\u003e\n\u003cp\u003eApply an application of Owatrol Oil and allow to dry.\u003c\/p\u003e\n\u003ch3\u003eNon-ferrous Metals (New or Oxidised)\u003c\/h3\u003e\n\u003cp\u003eSand surface using appropriate grade abrasive or a passivating solution. For Aluminium surfaces ensure abrasive is compatible. If required thoroughly dust off and wipe surface with a cloth soaked in a fast flash off solvent e.g. Acetone (NOT White Spirit) to remove any remaining dust residue.\u003c\/p\u003e\n\u003cp\u003eAllow to dry.\u003c\/p\u003e\n\u003cp\u003eApply an application of Owatrol Oil and allow to dry.\u003c\/p\u003e\n\u003ch3\u003eGalvanised\/Zinc Surfaces\u003c\/h3\u003e\n\u003cp\u003eNew Surfaces (12 months and under): Pickle with a phosphoric solution. Weathered Surfaces (12 months+): Clean with a suitable solvent e.g. Acetone, Owaclean etc. Apply an application of Owatrol Oil and allow to dry.\u003c\/p\u003e\n\u003cp\u003eNote: Depending on the preparation process used some discolouration of the surface may be experienced.\u003c\/p\u003e\n\u003ch3\u003eRusted Surfaces (To maintain the rust appearance)\u003c\/h3\u003e\n\u003cp\u003eRemove all loose and flaking rust back to a sound surface and edge by wire brush or scraping. Thoroughly dust off.\u003c\/p\u003e\n\u003cp\u003eApply an application of Owatrol Oil and allow to dry.\u003c\/p\u003e\n\u003ch3\u003ePreviously Coated Surfaces\u003c\/h3\u003e\n\u003cp\u003eRemove all previous coatings by suitable means – blasting, grinding, mechanical abrasion or chemically stripping with DSP 800 or Dilunett to restore the surface to its original condition. If required sand surface with appropriate grade abrasive. Thoroughly dust off.\u003c\/p\u003e\n\u003cp\u003eApply an application of Owatrol Oil and allow to dry.\u003c\/p\u003e\n\u003cp\u003eNote: Where the surface is rinsed with water allow to dry 24 to 72 hours before applying Owatrol Oil.\u003c\/p\u003e\n\u003ch2\u003eDilutions\u003c\/h2\u003e\n\u003cp\u003e1 part Owayell to 5 parts water.\u003cbr\u003eLeave to work 5-10 minutes.\u003cbr\u003eRinse thoroughly and allow to dry\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse as is.\u003c\/li\u003e\n\u003cli\u003eDo not thin.\u003c\/li\u003e\n\u003cli\u003eStir well before and during use.\u003c\/li\u003e\n\u003cli\u003eApply 1st coat of Oxid Vernis and allow to dry 24 hours.\u003c\/li\u003e\n\u003cli\u003eSand surface with 280 grit abrasive and thoroughly dust off.\u003c\/li\u003e\n\u003cli\u003eApply 2nd coat of Oxid Vernis.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: Adding Owatrol Oil to Oxid Vernis, makes brushing easier and gives Oxid Vernis even greater flexibility, further reducing the risk of peeling and cracking.\u003c\/p\u003e\n\u003ch2\u003eMaintenance \u0026amp; Cleaning\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCleaning\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean surface regularly with a brush, vacuum cleaner or with fresh water.\u003c\/li\u003e\n\u003cli\u003eFor the first 14 days do not clean Oxid Vernis with water.\u003c\/li\u003e\n\u003cli\u003eDo not use aggressive chemical cleaners to remove grease or any other type of dirt that has accumulated on the surface (Contact us).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaintenance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOxid Vernis in good condition:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand surface with 280 grit abrasive and thoroughly dust off.\u003c\/li\u003e\n\u003cli\u003eApply 1st coat Oxid Vernis with 25% Owatrol Oil added.\u003c\/li\u003e\n\u003cli\u003eAllow to dry 24 to 48 hours.\u003c\/li\u003e\n\u003cli\u003eApply 2nd coat of Oxid Vernis.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOxid Vernis in poor condition:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSee “Previously Coated Surfaces” in “Surface Preparation” above.\u003c\/li\u003e\n\u003cli\u003eApply Oxid Vernis as directed in “Application” above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eClean up\u003c\/h2\u003e\n\u003cp\u003eClean all tools and equipment with White Spirits while still wet. If allowed to dry, remove with paint stripper.\u003c\/p\u003e\n\u003ch2\u003eThings to remember\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover everything you do not wish to paint.\u003c\/li\u003e\n\u003cli\u003eApply between 5˚C and 35˚C.\u003c\/li\u003e\n\u003cli\u003eDo not apply in direct sunlight or on to hot surfaces.\u003c\/li\u003e\n\u003cli\u003eEnsure the room is well ventilated when using inside.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"750 ml \/ Matt","offer_id":42423494443251,"sku":"GK0612CLE0050","price":21.75,"currency_code":"GBP","in_stock":true},{"title":"750 ml \/ Satin","offer_id":42423537664243,"sku":"","price":21.75,"currency_code":"GBP","in_stock":true},{"title":"750 ml \/ Gloss","offer_id":42423537697011,"sku":"","price":21.75,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre \/ Matt","offer_id":42423494476019,"sku":"GK0612CLE0100","price":61.18,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre \/ Satin","offer_id":42423537729779,"sku":"","price":61.18,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre \/ Gloss","offer_id":42423537762547,"sku":"","price":61.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Oxid_vernis.png?v=1644495885"},{"product_id":"owatrol-pura-trol","title":"Owatrol Pura-Trol","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePura-Trol is a multi-purpose, water-based, industrial-strength cleaner that can also be used on a wide variety of surfaces including cars, boats and engines. Due to its degreasing ability, it can also be used to prepare surfaces for varnish.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt is perfect for use on car alloys to remove embedded brake dust and grime and can also be used for things such as to remove grease from a dirty cooker hood – perfect for a kitchen re-vamp.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003ePura-Trol is able to dispense a large spectrum of different and tenacious staining, without pitting the surface. It is a concentrated product free of solvents and acids, which can be diluted with water by up to 20 times.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe application is simple: apply, leave it for 10 minutes and wash it off with clean water.\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eIdeal uses for Pura-Trol\u003c\/h2\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUse for cleaning a wide variety of surfaces including vehicles, alloys and engines\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePerfect for reviving and cleaning your boat\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUse to degrease other surfaces such as cooker hoods\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDegrease surfaces ready for varnishing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAvailable in 1 litre bottle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication tools\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePump Sprayer\u003c\/li\u003e\n\u003cli\u003eBrush\u003c\/li\u003e\n\u003cli\u003eSponge\u003c\/li\u003e\n\u003cli\u003eHose\u003c\/li\u003e\n\u003cli\u003ePower Washer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eFirst, remove any organic surface growth – moss for example.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirty Surfaces:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 part Pura-Trol to 20 parts water.\u003cbr\u003e\u003cstrong\u003eVery Dirty Surfaces:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e1 part Pura-Trol to 10 parts water (for use on wheels for example).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePure-Trol is a concentrated formula. Use only the recommended dilutions. Do not use undiluted\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eApplication\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMake up a diluted solution as dictated by the surface contamination.\u003c\/li\u003e\n\u003cli\u003eStir or shake the solution well to ensure Pura-Trol is well mixed in.\u003c\/li\u003e\n\u003cli\u003eApply diluted Pura-Trol to the surface using a brush, sponge or pump sprayer.\u003c\/li\u003e\n\u003cli\u003eAllow the solution to work for 10 minutes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDo not\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eallow the solution to dry on the surface while working.\u003c\/li\u003e\n\u003cli\u003eRinse the surface with fresh clean water using a hose, power washer or bucket and sponge (making sure you change\u003cbr\u003ewater regularly).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eThings to remember\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover everything you do not wish to clean.\u003c\/li\u003e\n\u003cli\u003eApply between 10°C and 25°C.\u003c\/li\u003e\n\u003cli\u003eDo not apply in direct sunlight or to hot surfaces.\u003c\/li\u003e\n\u003cli\u003eWhen applying by spray, adjust the nozzle to prevent the formation of a mist.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"1 Litre","offer_id":42752162562291,"sku":"GK0299CLE0100","price":24.2,"currency_code":"GBP","in_stock":true},{"title":"20 Litre","offer_id":42752162627827,"sku":"GK0299CLE2000","price":240.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Pura-Trol-1_png.webp?v=1652286111"},{"product_id":"owatrol-absolute-primer","title":"Owatrol Absolute Primer","description":"\u003cp\u003eAbsolute Primer is a priming coat for bonding products from the Spirit range to smooth, difficult and non-porous surfaces.\u003c\/p\u003e\n\u003cp\u003eIt offers excellent adhesion so you can move onto the next step of decoration using the Spirit Range.\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for Absolute Primer\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrime glass, ceramics, non-ferrous metals, Stainless Steel etc\u003c\/li\u003e\n\u003cli\u003eOnce applied, can be used alongside any Spirit range product\u003c\/li\u003e\n\u003cli\u003eRevamp your interior or exterior design\u003c\/li\u003e\n\u003cli\u003eDecorate home ornaments\u003c\/li\u003e\n\u003cli\u003eUse on external garden surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you start\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover and protect everything you do not wish to coat.\u003c\/li\u003e\n\u003cli\u003eApply between 5°C and 25°C.\u003c\/li\u003e\n\u003cli\u003eDo not apply to hot surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSurfaces must be in good sound condition, clean, dry and free of all grease, oil and other surface contamination.\u003c\/li\u003e\n\u003cli\u003eMeticulously clean surface using a suitable cleaning agent depending on the substrate and contamination e.g. Acetone, Hot Soapy Water (rinse thoroughly) etc.\u003c\/li\u003e\n\u003cli\u003eAllow to dry\u003c\/li\u003e\n\u003cli\u003eSand plastic and shiny surface with fine grit abrasive to improve adhesion.\u003c\/li\u003e\n\u003cli\u003eThoroughly dust off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication of Absolute Primer\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse as is. Do not thin.\u003c\/li\u003e\n\u003cli\u003eStir or shake well before use.\u003c\/li\u003e\n\u003cli\u003eApply a coat of Absolute Primer to the surface being treated.\u003c\/li\u003e\n\u003cli\u003eAllow to dry.\u003c\/li\u003e\n\u003cli\u003eFinish with a product from the Owatrol Spirit range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRestrictions\u003c\/h2\u003e\n\u003cp\u003eDo not use on Polyethylene or Polypropylene plastics.\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eSoap and water.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"0.5 Litre","offer_id":42752488997107,"sku":"GK0101GRE0010","price":20.18,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre","offer_id":42752489029875,"sku":"GK0101GRE0250","price":70.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Absolute_Primer_png.webp?v=1652289835"},{"product_id":"owatrol-blocking-primer","title":"Owatrol Blocking Primer","description":"\u003cp\u003eBlocking Primer is a protective primer. It is for surfaces sensitive to acids where application of Rust Spirit, Copper Spirit or Bronze Spirit is used.\u003c\/p\u003e\n\u003cp\u003eBlocking Primer protects the surface from acid attack, preventing wood’s tannins from bleeding into the finish. It also prevents the “softening” of sensitive plastics.\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for Blocking Primer\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWood high in tannin content (Oak, Chestnut, Cedar etc)\u003c\/li\u003e\n\u003cli\u003eUse on plastics sensitive to acid to avoid softening\u003c\/li\u003e\n\u003cli\u003eCan be used on interior or exterior surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you start\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover and protect everything you do not wish to coat.\u003c\/li\u003e\n\u003cli\u003eApply between 5°C and 25°C.\u003c\/li\u003e\n\u003cli\u003eDo not apply to hot surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSurfaces must be in good sound condition, clean, dry and free of all grease, oil and other surface contamination.\u003c\/li\u003e\n\u003cli\u003eMeticulously clean surface using a suitable cleaning agent depending on the substrate and contamination.\u003c\/li\u003e\n\u003cli\u003eAllow to dry.\u003c\/li\u003e\n\u003cli\u003eSand bare wood surfaces with 80-100 grit paper. Thoroughly dust off.\u003c\/li\u003e\n\u003cli\u003ePrime plastics (except Polyethylene and Polypropylene) with Absolute Primer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplication of Blocking Primer\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse as is. Do not thin.\u003c\/li\u003e\n\u003cli\u003eStir or shake well before use.\u003c\/li\u003e\n\u003cli\u003eApply a coat of Blocking Primer.\u003c\/li\u003e\n\u003cli\u003eAllow to dry.\u003c\/li\u003e\n\u003cli\u003eFinish with a product from the Owatrol spirit range\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eSoap and water.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"0.5 Litre","offer_id":42752515604723,"sku":"GK0101GRE0010","price":28.5,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre","offer_id":42752515670259,"sku":"GK0101GRE0250","price":94.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Blocking_Primer_png.webp?v=1652289976"},{"product_id":"owatrol-reactiv-leaf-rust","title":"Owatrol Reactiv Leaf Rust","description":"\u003cp\u003eReactiv Leaf Rust is an anthracite coloured reactive paint.\u003c\/p\u003e\n\u003cp\u003eWhen combined with Rust Spirit, it allows you to create a natural decorative rust effect on nonferrous metals and other surfaces. It does this by reacting with the metal particles in Reactiv Leaf Rust.\u003c\/p\u003e\n\u003cp\u003eUse it to up-cycle any thing, from interior design ornaments, to garden features to walls!\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for Reactiv Leaf Rust\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOnce applied, can be used alongside Rust Spirit\u003c\/li\u003e\n\u003cli\u003eRevamp your interior or exterior design\u003c\/li\u003e\n\u003cli\u003eDecorate home ornaments\u003c\/li\u003e\n\u003cli\u003eUse on external garden surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you start\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover and protect everything you do not wish to coat.\u003c\/li\u003e\n\u003cli\u003eApply between 5°C and 25°C.\u003c\/li\u003e\n\u003cli\u003eDo not apply to hot surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSurfaces must be in good sound condition, clean, dry and free of all grease, oil and other surface contamination.\u003c\/li\u003e\n\u003cli\u003eMeticulously clean surface using a suitable cleaning agent depending on the substrate and contamination e.g. Acetone, Hot Soapy Water (rinse thoroughly) etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNon-Porous and Difficult Surfaces (Plastic, Glass, Stainless Steel, Non-Ferrous Metals etc)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePrimer surface with Absolute Primer prior to using Reactiv Leaf Rust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSurfaces Sensitive to Acids (Woods high in tannin e.g. Oak, Chestnut. Some Plastics)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePrimer surface with Blocking Primer prior to using Reactiv Leaf Rust.\u003c\/p\u003e\n\u003cp\u003eNote: Reactiv Leaf Copper is not required on ferrous surfaces.\u003c\/p\u003e\n\u003ch2\u003eApplication of Reactiv Leaf Rust\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse as is. Do not thin.\u003c\/li\u003e\n\u003cli\u003eStir or shake well before use.\u003c\/li\u003e\n\u003cli\u003eApply a coat of Reactiv Leaf Rust to the surface being treated.\u003c\/li\u003e\n\u003cli\u003eAllow to dry.\u003c\/li\u003e\n\u003cli\u003eSee Rust Spirit Technical Data Sheet for next stage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUsing a brush to apply Reactiv Leaf Rust with a dabbing action allows for a very natural rust effect to be created (see video).\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eSoap and water.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"0.5 Litre \/ Rust","offer_id":42752534905075,"sku":"GK0101GRE0010","price":36.21,"currency_code":"GBP","in_stock":false},{"title":"0.5 Litre \/ Copper","offer_id":42752553287923,"sku":"GK0101GRE0010","price":36.21,"currency_code":"GBP","in_stock":false},{"title":"0.5 Litre \/ Bronze","offer_id":42752553320691,"sku":"GK0101GRE0010","price":36.21,"currency_code":"GBP","in_stock":false},{"title":"2.5 Litre \/ Rust","offer_id":42752534970611,"sku":"GK0101GRE0250","price":139.1,"currency_code":"GBP","in_stock":false},{"title":"2.5 Litre \/ Copper","offer_id":42752553353459,"sku":"GK0101GRE0010","price":139.1,"currency_code":"GBP","in_stock":false},{"title":"2.5 Litre \/ Bronze","offer_id":42752553386227,"sku":"GK0101GRE0010","price":139.1,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Reactiv-Leaf-Rust-1_png.webp?v=1652290193"},{"product_id":"owatrol-rust-spirit","title":"Owatrol Rust Spirit","description":"\u003cp\u003eRust Spirit is a natural rust activator for creating decorative rust effects on ferrous metals or surfaces treated with Reactiv Leaf Rust.\u003c\/p\u003e\n\u003cp\u003eUsing Rust Spirit means you can easily and specifically choose how you want your new surface to turn out. Leaving something to rust and weather naturally can cause damage to the surface and you may not get the desire look you want.\u003c\/p\u003e\n\u003cp\u003eThe handy 500ml Rust Spirit spray means you can apply as much or as little rust as you like!\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for Rust Spirit\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTo create a quick rust effect finish\u003c\/li\u003e\n\u003cli\u003eDecorate home ornaments\u003c\/li\u003e\n\u003cli\u003eUse on external garden surfaces\u003c\/li\u003e\n\u003cli\u003eCreate unique works of art\u003c\/li\u003e\n\u003cli\u003eChange up your interior or exterior design\u003c\/li\u003e\n\u003cli\u003eBe in control of how much rust you want\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you start\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover and protect everything you do not wish to coat.\u003c\/li\u003e\n\u003cli\u003eApply between 5°C and 25°C.\u003c\/li\u003e\n\u003cli\u003eDo not apply to hot surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eSurfaces must be in good sound condition, clean, dry and free of all grease, oil and other surface contamination.\u003c\/p\u003e\n\u003cp\u003eMeticulously clean surface using a suitable cleaning agent depending on the substrate and contamination e.g. Acetone, hot soapy water (rinse thoroughly) etc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFerrous Metal Surfaces:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRemove any protective coating\/finish back to the bare metal surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll Other Surface Types:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTreat with Reactiv Leaf Rust\u003c\/p\u003e\n\u003ch2\u003eApplication of Rust Spirit\u003c\/h2\u003e\n\u003cp\u003eUse as is – do not thin and shake well before use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFerrous Metals and Surfaces Primed with Reactiv Leaf Rust\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply Rust Spirit by spray or using one of the “Application” tools.\u003c\/li\u003e\n\u003cli\u003eRust formation will start quickly. If rust does not occur on ferrous metals there is a protective film on the surface and this should be removed before re-applying Rust Spirit.\u003c\/li\u003e\n\u003cli\u003eRepeat application of Rust Spirit at regular intervals (15-30 minutes) until the desired effect and colour has been achieved.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOnce the desired decorative effect has been achieved the rusting process should be stopped and protected, one of two ways.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSemi-sheen Finish:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eApply a generous application of Owatrol Oil\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMatt Finish:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eApply an application of Spirit Sealer and Natural Varnish.\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eSoap and water\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"Spray 500 ML","offer_id":42752564035827,"sku":"GK0101GRE0010","price":22.53,"currency_code":"GBP","in_stock":false},{"title":"5 Litre","offer_id":42752564068595,"sku":"GK0101GRE0250","price":60.73,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Rust_spirit_png.webp?v=1652290629"},{"product_id":"owatrol-copper-spirit","title":"Owatrol Copper Spirit","description":"\u003cp\u003eCopper Spirit is a grey-green (verdigris) activator for creating realistic aged copper effects on bare copper surfaces, or surfaces treated with Reactive Leaf Copper.\u003c\/p\u003e\n\u003cp\u003eUsing Copper Spirit means you can easily and specifically choose how you want your new surface to turn out. Leaving copper to weather naturally can cause damage to the copper and you may not get the desired look you want.\u003c\/p\u003e\n\u003cp\u003eThe handy 500ml Copper Spirit spray means you can apply as much or as little verdigris as you like!\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for Copper Spirit\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTo create the appearance of aged copper\u003c\/li\u003e\n\u003cli\u003eDecorate home ornaments\u003c\/li\u003e\n\u003cli\u003eUse on external garden surfaces\u003c\/li\u003e\n\u003cli\u003eCreate unique works of art\u003c\/li\u003e\n\u003cli\u003eChange up your interior or exterior design\u003c\/li\u003e\n\u003cli\u003eBe in control of how much verdigris you want\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you start\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover and protect everything you do not wish to coat and are sensitive to acids.\u003c\/li\u003e\n\u003cli\u003eApply between 5°C and 25°C.\u003c\/li\u003e\n\u003cli\u003eDo not apply to hot surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eSurfaces must be in good sound condition, clean, dry and free of all grease, oil and other surface contamination.\u003cbr\u003eMeticulously clean surface using a suitable cleaning agent depending on the substrate and contamination e.g. Acetone, Hot Soapy Water (rinse thoroughly) etc.\u003cbr\u003eFor copper surfaces, remove any protective coating\/finish back to the bare copper surface.\u003cbr\u003eAll other surface types need to be treated with Reactiv Leaf Copper\u003c\/p\u003e\n\u003ch2\u003eApplication of Copper Spirit\u003c\/h2\u003e\n\u003cp\u003eUse as is – do not thin and shake well before use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCopper Surfaces:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply COPPER SPIRIT by spray or using one of the “Application” tools.\u003cbr\u003eOxidation will start quickly. If oxidation does not occur there is a protective film on the surface and\u003cbr\u003ethis should be removed before re-applying COPPER SPIRIT.\u003c\/li\u003e\n\u003cli\u003eRepeat application of COPPER SPIRIT at regular intervals (15-30 minutes) until the desired effect and\u003cbr\u003ecolour has been achieved. If the blue oxide effect is too pronounced apply touch up applications of\u003cbr\u003eREACTIV LEAF COPPER*.\u003c\/li\u003e\n\u003cli\u003eOnce the desired decorative effect has been achieved the oxidising process should be stopped and\u003cbr\u003eprotected, one of two ways.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSemi-sheen Finish:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eApply a generous application of Owatrol Oil.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMatt Finish:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eApply an application of Spirit Sealer and Natural Varnish\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSurfaces Primed with Reactiv Leaf Copper:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply a 2nd coat of Reactiv Leaf Copper and after 5 minutes and while the Reactiv Leaf Copper is still wet\/moist apply Copper Spirit.\u003c\/li\u003e\n\u003cli\u003eFollow directions as from point 2 above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: The application of Copper Spirit, to surfaces treated with Reactiv Leaf Copper must be by spray only.\u003c\/p\u003e\n\u003cp\u003eApplying Copper Spirit to areas in an irregular manner will create a very natural final effect (see video).\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eSoap and water\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"Spray 500 ML","offer_id":42752646021363,"sku":"GK0101GRE0010","price":22.53,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Copper_spirit_png.webp?v=1652291671"},{"product_id":"owatrol-bronze-spirit","title":"Owatrol Bronze Spirit","description":"\u003cp\u003eBronze Spirit is a blue oxide activator for creating realistic decorative effects on bare bronze surfaces or surfaces treated with Reactiv Leaf Bronze.\u003c\/p\u003e\n\u003cp\u003eUsing Bronze Spirit means you can easily and specifically choose how you want your new surface to look. Leaving a bronze surface to oxidise and weather naturally can cause damage to the surface and you may not get the desire look you want.\u003c\/p\u003e\n\u003cp\u003eThe handy 500ml Bronze Spirit spray means you can apply as much or as little as you like!\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for Bronze Spirit\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTo create an aged bronze finish\u003c\/li\u003e\n\u003cli\u003eDecorate home ornaments\u003c\/li\u003e\n\u003cli\u003eUse on external garden surfaces\u003c\/li\u003e\n\u003cli\u003eCreate unique works of art\u003c\/li\u003e\n\u003cli\u003eChange up your interior or exterior design\u003c\/li\u003e\n\u003cli\u003eBe in control of how much blue oxidisation you want\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you start\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover and protect everything you do not wish to coat.\u003c\/li\u003e\n\u003cli\u003eApply between 5°C and 25°C.\u003c\/li\u003e\n\u003cli\u003eDo not apply to hot surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eSurfaces must be in good sound condition, clean, dry and free of all grease, oil and other surface contamination.\u003c\/p\u003e\n\u003cp\u003eMeticulously clean surface using a suitable cleaning agent depending on the substrate and contamination e.g. Acetone, hot soapy water (rinse thoroughly) etc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBronze Surfaces:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eRemove any protective coating\/finish back to the bare bronze surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll Other Surface Types:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTreat with Reactiv Leaf Bronze\u003c\/p\u003e\n\u003ch2\u003eApplication of Bronze Spirit\u003c\/h2\u003e\n\u003cp\u003eUse as is – do not thin and shake well before use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBronze Surfaces:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply Bronze Spirit by spray or using one of the “Application” tools. Oxidation will start quickly. If oxidation does not occur there is a protective film on the surface and this should be removed before re-applying Bronze Spirit.\u003c\/li\u003e\n\u003cli\u003eRepeat application of Bronze Spirit at regular intervals (15-30 minutes) until the desired effect and colour has been achieved. If the blue oxide effect is too pronounced apply touch up applications of Reactiv Leaf Bronze.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOnce the desired decorative effect has been achieved the oxidising process should be stopped and\u003cbr\u003eprotected, one of two ways.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSemi-sheen Finish:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eApply a generous application of Owatrol Oil\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMatt Finish:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eApply an application of Spirit Sealer and Natural Varnish\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSurfaces Primed with Reactiv Leaf Bronze\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply a 2nd coat of Reactiv Leaf Bronze. and after 5 minutes and while the Reactiv Leaf Bronze. is still wet\/moist apply Bronze Spirit\u003c\/li\u003e\n\u003cli\u003eFollow directions as from point 2 above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: The application of Bronze Spirit, to surfaces treated with Reactiv Leaf Bronze. Must be by spray only\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eSoap and water\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"Spray 500 ML","offer_id":42752663191795,"sku":"GK0101GRE0010","price":22.53,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Bronze_Spirit_png.webp?v=1652291837"},{"product_id":"owatrol-spirit-sealer","title":"Owatrol Spirit Sealer","description":"\u003cp\u003eSpirit Sealer neutralises the effect of Rust Spirit, Copper Spirit and Bronze Spirit.\u003c\/p\u003e\n\u003cp\u003eStopping and neutralising the oxidising effect of these three products, Spirit Sealer allows you to fix the decorative effect and colour once the desired level of oxidising has been achieved.\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for Spirit Sealer\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBe in control of how much oxidisation you want\u003c\/li\u003e\n\u003cli\u003eDecorate home ornaments\u003c\/li\u003e\n\u003cli\u003eUse on external garden surfaces\u003c\/li\u003e\n\u003cli\u003eProtect and seal your decorative surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you start\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover and protect everything you do not wish to coat.\u003c\/li\u003e\n\u003cli\u003eApply between 5°C and 25°C.\u003c\/li\u003e\n\u003cli\u003eDo not apply to hot surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eSurfaces must be clean, dry, free of any surface contamination and previously finished with a decorative effect product from the Spirit range.\u003c\/p\u003e\n\u003ch2\u003eApplication of Spirit Sealer\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse as is. Do not thin.\u003c\/li\u003e\n\u003cli\u003eStir well before use.\u003c\/li\u003e\n\u003cli\u003eAvoiding over application, apply an even coat of Spirit Sealer to the entire decorated area, to neutralise and stop the oxidising process of Rust Spirit, Copper Spirit Or Bronze Spirit.\u003c\/li\u003e\n\u003cli\u003eAllow to dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: For maximum protection apply Natural Varnish or Owatrol Oil depending on the desired final finish. Spirit Sealer is not required where Owatrol Oil is applied as the final finish.\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eSoap and water.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"0.5 Litre","offer_id":42752676954355,"sku":"GK0101GRE0010","price":32.15,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre","offer_id":42752676987123,"sku":"GK0101GRE0250","price":112.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Spirit_Sealer_png.webp?v=1652291958"},{"product_id":"owatrol-natural-varnish","title":"Owatrol Natural Varnish","description":"\u003cp\u003eNatural Varnish is a matt finish for use on decorative effects created using the Owatrol Spirit range.\u003c\/p\u003e\n\u003cp\u003eUse Owatrol Natrual Varnish to help seal and protect decorative effects that have been created by using a product from the Spirit Range.\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for Natural Varnish\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProtect decorate home ornaments\u003c\/li\u003e\n\u003cli\u003eCan be used to protect surfaces from external weathering\u003c\/li\u003e\n\u003cli\u003eCreate a contrasting decorative effect on glossy surfaces\u003c\/li\u003e\n\u003cli\u003eUse on internal or external surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you start\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover and protect everything you do not wish to coat.\u003c\/li\u003e\n\u003cli\u003eApply between 5°C and 25°C.\u003c\/li\u003e\n\u003cli\u003eDo not apply to hot surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eSurfaces must be clean, dry, free of any surface contamination and previously finished with a decorative effect product from the Spirit range.\u003c\/p\u003e\n\u003ch2\u003eApplication of Natural Varnish\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse as is – do not thin and shake well before use.\u003c\/li\u003e\n\u003cli\u003eApply an even application of Natural Varnish to all treated areas.\u003c\/li\u003e\n\u003cli\u003eAllow to dry.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWith Natural Varnish it is possible to create a contrasting decorative effect on glossy surfaces.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApply Natural Varnish randomly using a sponge, soft brush or rag leaving treated and untreated areas.\u003c\/li\u003e\n\u003cli\u003eThe result when dry is contrasting matt and glossy areas.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: In these cases protection will only be assured where the Natural Varnish was applied\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eSoap and water\u003c\/p\u003e\n\u003ch2\u003eRestrictions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNot suitable for use on floors.\u003c\/li\u003e\n\u003cli\u003eDo not use outside on significantly rusted surfaces.\u003c\/li\u003e\n\u003cli\u003eDo not use outside where it will be exposed to intense UV, Weathering etc.\u003c\/li\u003e\n\u003cli\u003eDo not apply directly to surfaces finished with Rust Spirit, Copper Spirit or Bronze Spirit, these surfaces should be finished with Spirit Sealer before applying Natural Varnish.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"0.5 Litre","offer_id":42752692191475,"sku":"GK0101GRE0010","price":30.06,"currency_code":"GBP","in_stock":true},{"title":"2.5 Litre","offer_id":42752692224243,"sku":"GK0101GRE0250","price":108.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Natural_varnish_png.webp?v=1652292136"},{"product_id":"owatrol-crackle-spirit-step-1-and-2","title":"Owatrol Crackle Spirit Step 1 and 2","description":"\u003cp\u003eCrackle Spirit Step 1 is the first step in a system for creating a contemporary crackle effect (porcelain type cracks) on any surface.\u003c\/p\u003e\n\u003cp\u003eConsisting of 2 methods, Crackle Spirit allows you to create a crackle effect on previously coloured surfaces. Or, you can mix colours in to the Crackle Spirit, creating a two tone crackle effect.\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for Crackle Spirit\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGive any surface a contemporary crackle effect\u003c\/li\u003e\n\u003cli\u003eUse before application of Crackle Spirit – Step 2\u003c\/li\u003e\n\u003cli\u003eRevamp your interior design\u003c\/li\u003e\n\u003cli\u003eDecorate home ornaments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you start\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover and protect everything you do not wish to coat.\u003c\/li\u003e\n\u003cli\u003eApply between 5°C and 25°C.\u003c\/li\u003e\n\u003cli\u003eDo not apply to hot surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSurfaces must be in good sound condition, clean, dry and free of all grease, oil and other surface contamination.\u003c\/li\u003e\n\u003cli\u003eMeticulously clean surface using a suitable cleaning agent depending on the substrate and contamination e.g. Acetone, Hot Soapy Water (rinse thoroughly) etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNon-Porous and Difficult Surfaces (Plastic, Glass, Stainless Steel, Non-Ferrous Metals etc)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePrimer surface with Absolute Primer prior to using Crackle Spirit\u003c\/p\u003e\n\u003ch2\u003eApplication of Crackle Spirit\u003c\/h2\u003e\n\u003cp\u003eUse as is – do not thin. Stir or shake well before use.\u003c\/p\u003e\n\u003ch3\u003eMethod 1: Coloured Backgrounds:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApply a generous coat of Crackle Spirit – Step 1 to a dry, previously painted or coloured surface.\u003c\/li\u003e\n\u003cli\u003eAllow to dry. The dried product remains sticky.\u003c\/li\u003e\n\u003cli\u003eApply a thin coat of Crackle Spirit – Step 2.\u003c\/li\u003e\n\u003cli\u003eCracks will start to appear after a few minutes.\u003c\/li\u003e\n\u003cli\u003eAllow to dry before handling.\u003c\/li\u003e\n\u003cli\u003eThe cracks will show as transparent.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNote:\u003c\/em\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eOnce the Crackle Spirit – Step 2 is dry and for a different effect a water-based\/acrylic paint may be applied to the cracked surface and any excess wiped off while the paint is still wet.\u003c\/p\u003e\n\u003cp\u003eThe wiped of paint will remain in the cracks and the background colour will be revealed.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSee demonstration video in gallery for more information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eMethod 2: Adding Colour to Crackle Spirit\u003c\/h3\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eBase-coat:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdd a water-based\/acrylic paint or universal colourant (3% – 7%) in you colour of choice to Crackle Spirit – Step 1. Ensure colour is well mixed in.\u003c\/li\u003e\n\u003cli\u003eApply a generous coat of the coloured Crackle Spirit – Step 1.\u003c\/li\u003e\n\u003cli\u003eAllow to dry. The dried product remains sticky.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eTopcoat:\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdd a water-based\/acrylic paint or universal colourant (3% – 7%) in you colour of choice to Crackle Spirit – Step 2. Ensure colour is well mixed in.\u003c\/li\u003e\n\u003cli\u003eApply a thin coat of the coloured Crackle Spirit – Step 2.\u003c\/li\u003e\n\u003cli\u003eCracks will start to appear after a few minutes.\u003c\/li\u003e\n\u003cli\u003eAllow to dry before handling.\u003c\/li\u003e\n\u003cli\u003eThe cracks will show as the base colour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/em\u003e The size of the cracks desired depends on the application of Crackle Spirit – Step 1. The thicker the application, the larger the crack size.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eSee demonstration video in gallery for more information.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eSoap and water.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"0.5 Litre \/ Step 1","offer_id":42752705724659,"sku":"GK0101GRE0010","price":33.03,"currency_code":"GBP","in_stock":true},{"title":"0.5 Litre \/ Step 2","offer_id":42752719290611,"sku":"","price":33.03,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Crackle-Spirit-Step1_png.webp?v=1652292285"},{"product_id":"owatrol-antik-crackle","title":"Owatrol Antik Crackle","description":"\u003cp\u003eAntik Crackle is a translucent coating for creating natural looking antique or old style random cracked effects.\u003c\/p\u003e\n\u003cp\u003eUse it to up-cycle any thing, from interior design ornaments, to garden features to walls!\u003c\/p\u003e\n\u003cp\u003eIt can be used on any surface with varying degrees of “cracking”.\u003c\/p\u003e\n\u003ch2\u003eIdeal uses for Antik crackle\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFurniture such as wooden chairs or tables etc\u003c\/li\u003e\n\u003cli\u003ePicture frames, Dados rails etc\u003c\/li\u003e\n\u003cli\u003eHome furnishings such as lamp stands, bowls, coat racks\u003c\/li\u003e\n\u003cli\u003eUse on all surface types.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you start\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover and protect everything you do not wish to coat.\u003c\/li\u003e\n\u003cli\u003eApply between 5°C and 25°C.\u003c\/li\u003e\n\u003cli\u003eDo not apply to hot surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSurfaces must be in good sound condition, clean, dry and free of all grease, oil and other surface contamination.\u003c\/li\u003e\n\u003cli\u003eMeticulously clean surface using a suitable cleaning agent depending on the substrate and contamination e.g. Acetone, Hot Soapy Water (rinse thoroughly) etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNon-Porous and Difficult Surfaces (Plastic, Glass, Stainless Steel, Non-Ferrous Metals etc)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePrimer surface with Absolute Primer prior to using Antik Crackle.\u003c\/p\u003e\n\u003ch2\u003eApplication of Antik Crackle\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse as is. Do not thin.\u003c\/li\u003e\n\u003cli\u003eStir or shake well before use.\u003c\/li\u003e\n\u003cli\u003eThe colour of the cracks will be that of the surface or for a different coloured surface apply a coat of water-based\/acrylic paint in the chosen colour and allow to dry.\u003c\/li\u003e\n\u003cli\u003eApply a very generous coat of Antik Crackle\u003c\/li\u003e\n\u003cli\u003eAllow to dry (The dry product may remain sticky).\u003c\/li\u003e\n\u003cli\u003eApply a coat of water-based\/acrylic paint in the chosen colour.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEnsure the paint is applied and left alone.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eDo not\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRe-apply or smooth out.\u003c\/p\u003e\n\u003cp\u003eAllow the paint to dry as per the manufacturer’s instructions. The background colour shows between the cracks within a few minutes as the paint is drying\u003c\/p\u003e\n\u003cp\u003eFor added and long term protection of the cracked effect, apply a coat of Natural Varnish.\u003c\/p\u003e\n\u003cp\u003eIrregular and\/or dappled application of the Antik Crackle and\/or the finish allows a very natural cracked effect to be obtained.\u003c\/p\u003e\n\u003cp\u003eWhen the final effect is dry but not protected by Natural Varnish, it is possible to create an aged effect as shown in the photos. To achieve this, pour very hot water on to the areas you wish to create this effect on, to remove the finish.\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eSoap and water.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"0.5 Litre","offer_id":42752734331123,"sku":"GK0101GRE0010","price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Antik-Crackle_png.webp?v=1652292574"},{"product_id":"owatrol-gelcoat-restorer-marine-polytrol","title":"Owatrol Gelcoat Restorer Marine Polytrol","description":"\u003cp\u003eGelcoat Restorer is a deep penetrating oil that penetrates deep into gelcoat to re-wet the pigment and so \u003cstrong\u003erestore the dull, faded look of the gelcoat\u003c\/strong\u003e to its original colour and lustre. It then dries to a tough, long-lasting and flexible finish. Gelcoat Restorer eliminates the need for\u003cbr\u003eexpensive waxes and polishes that sit on the surface and dry out quickly.\u003c\/p\u003e\n\u003cp\u003eSimple to apply using a cloth or soft brush, it’s ready to wipe off in just 10 minutes! It can be used on both horizontal and vertical surfaces and can even be used on fibreglass (GRP). Gelcoat Restorer dries to a tough and long-lasting flexible finish which does not leave a film – so it won’t peel or flake.\u003c\/p\u003e\n\u003ch2\u003eIdeal Uses for Gelcoat Restorer\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReviving the gelcoat on your boat\u003c\/li\u003e\n\u003cli\u003eRestoring the shine to metal fixtures\u003c\/li\u003e\n\u003cli\u003eRejuvenating flat or chalky paint dulled by weathering\u003c\/li\u003e\n\u003cli\u003eBrightening the surface of tiles in stone, terracota, marble, slate, etc.\u003c\/li\u003e\n\u003cli\u003eReviving the color of faded GRP surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRestrictions:\u003c\/h2\u003e\n\u003ch2\u003eDO NOT use Gelcoat Restorer on \u003cstrong\u003ewhite \u003c\/strong\u003esurfaces, it will not work as it is designed to restore pigments.\u003c\/h2\u003e\n\u003ch2\u003eSurface Preparation\u003c\/h2\u003e\n\u003cp\u003eAll surfaces must be clean, dry and free of dirt, grease, grime and mildew. All waxes, polishes, silicone etc. should be completely and thoroughly removed. Treat any mildew with a 50:50 bleach and water solution. Scrub the solution on to the surface and allow it to stand for 10-15 minutes then rinse thoroughly.\u003c\/p\u003e\n\u003cp\u003eClean the surface with warm soapy water or \u003ca title=\"Deck Cleaner\" href=\"https:\/\/www.tradepaintdirect.co.uk\/products\/owatrol-deck-cleaner\" target=\"_blank\"\u003eDeck Cleaner\u003c\/a\u003e, rinse thoroughly and allow it to dry for a minimum of 24 hours depending on surface.\u003c\/p\u003e\n\u003ch2\u003eApplication of Gelcoat Restorer\u003c\/h2\u003e\n\u003ch3\u003eGeneral directions\u003c\/h3\u003e\n\u003cp\u003eAlways work in areas that can be completed 10-20 minutes to ensure an even appearance. If the surface absorbs the Gelcoat Restorer unevenly (i.e. some matt and some shiny patches) move any surplus oil from shiny areas to matt areas. Wipe off any excess Gelcoat Restorer with a lint-free cloth before it becomes tacky. For a shinier finish, buff the surface with a lint-free polishing cloth.\u003c\/p\u003e\n\u003cp\u003eFirst, saturate a soft cloth with Gelcoat Restorer and wipe it on. With a soft cloth, wipe off any excess within 10 minutes. Next gently polish with a lint-free cloth to a new sheen.\u003c\/p\u003e\n\u003cp\u003eNote: Gelcoat Restorer is not a surface coating. Its place is \u003cstrong\u003ein \u003c\/strong\u003ethe surface, not on top.\u003c\/p\u003e\n\u003cp\u003eFor application instructions for different uses of Gelcoat Restorer please see \u003ca title=\"Polytrol\" href=\"https:\/\/www.tradepaintdirect.co.uk\/products\/owatrol-polytrol-colour-restorer\" target=\"_blank\"\u003ePolytrol\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eMaintenance\u003c\/h2\u003e\n\u003cp\u003eMaintenance is due when a Gelcoat Restorer treated surface shows signs of fading. Prepare and re-treat surfaces as directed above.\u003c\/p\u003e\n\u003ch2\u003eClean Up\u003c\/h2\u003e\n\u003cp\u003eClean any tools used with white spirit. Gelcoat Restorer is non-flammable, however, any rags, steel wool etc. soaked in Gelcoat Restorer may spontaneously catch fire if improperly discarded. Rags, steel wool etc must be saturated with water after use or placed in a sealed, water-filled metal container, before disposing of them with household waste. Rags may be laid flat and air-dried before discarding.\u003c\/p\u003e\n\u003ch2\u003eThings to Remember\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCover and protect everything you do not wish to treat.\u003c\/li\u003e\n\u003cli\u003eApply between +5°C and +35°C.\u003c\/li\u003e\n\u003cli\u003eDo not apply in direct sunlight or on to hot surfaces.\u003c\/li\u003e\n\u003cli\u003eDo not allow excess Gelcoat Restorer to dry and create a film on the surface (always remove excess product).\u003c\/li\u003e\n\u003cli\u003eDo not use Gelcoat Restorer on white surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cdiv data-canvas-width=\"654.8466666666667\"\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Owatrol","offers":[{"title":"0.5 Litre","offer_id":42883223159027,"sku":"GK0280CLE0050","price":15.88,"currency_code":"GBP","in_stock":false},{"title":"1 Litre","offer_id":42883196092659,"sku":"GK0280CLE0100","price":26.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0281\/1016\/0004\/products\/Marine_Polytrol.png?v=1655462264"}],"url":"https:\/\/www.tradepaintdirect.co.uk\/collections\/marine-and-auto-coatings\/marine-and-auto-coatings.oembed","provider":"Trade Paint Direct","version":"1.0","type":"link"}