Dulux Trade Weathershield Textured Masonry Paint PBW

More Views

Dulux Trade Weathershield Textured Masonry Paint PBW

Availability: In stock



An exterior quality, fine texture emulsion paint based on an all acrylic resin.

It contains a fungicide to inhibit mould growth on the paint film.

The formulation gives an attractive fine granular finish and allows a higher build.

Application information

  • Coverage On smooth surfaces of low porosity e.g., rendering: 6-8m² per litre On textured surfaces of low porosity e.g., pebbledash: 3-4m² per litre. These figures are only an approximate guide due to the variation of different building surfaces and may be reduced.
  • Touch dry 1-2 hours, dependent on temperature and humidity
  • Recoatable 2-4 hours. These times will be significantly longer in cold, damp conditions.
  • Thinning: Brush or roller application: for sealing new or bare surfaces, 1 part clean water to 5 parts paint. For normal use: thinning should not exceed 1 part clean water to 10 parts paint.
Key benefits
  • Helps bridge fine hairline cracks.
  • Contains a fungicide and algicide to resist disfiguring surface growths on its surface.
  • For a textured finish on exterior walls, including blockwork, concrete, stonework, cement rendering, roughcast, pebbledash & brick.
  • Formulation Water-based
  • Pack sizes 5L, 10L*
  • Colour range More than 1200 colours - http://dulux.trade-decorating.co.uk/colours/index.jsp
Search Engine Optimisation By Bright Design