Thermoguard Flame Retardant 2 pack epoxy Floor Paint

Thermoguard Flame Retardant Floor Paint is a heavy-duty, flame retardant coating for interior concrete floors to showrooms, factories, warehouses, workshops, garages, etc. It is a water-based, high durability two-pack epoxy resin coating, designed to withstand vehicular and fork lift truck traffic. The chemically cured coating provides excellent resistance to oils, inks and other chemicals.

Colour Range & Finish

Semi-Gloss finish in the following colours;

  • Tile Red
  • Dark Green
  • Blue
  • Light Grey
  • Mid Grey
  • White

Other RAL and BS colours can be produced to order, minimum quantities and lead times apply.

  • Sale
  • Regular price £149.00
Shipping calculated at checkout.


Description

Product Description

Thermoguard Flame Retardant Floor Paint is a heavy-duty decorative flame retardant coating for interior concrete floors to showrooms, factories, warehouses, workshops, garages, etc. It is a water-based, high durability two-pack epoxy resin coating, designed to withstand vehicular and fork lift truck traffic. The chemically cured coating provides excellent resistance to oils, inks and other chemicals.

Fire Performance & Tests

  • Tests at UKAS Fire Test Laboratory indicated BS 476 Parts 6 & 7 Class O, EN Class B s1 dO
  • Thermoguard issue a Fire Certificate for materials supplied to appropriate projects.

Surface Preparation

Ensure surface is sound, clean and thoroughly dry. Remove any latence or slurry. Machine polished / power floated concrete floors should be mechanically or acid etched to provide a key. If acid is used, rinse to neutralise, & allow to dry. For previously painted floors, ensure existing paint films are sound and firmly adhering. Remove all loose, flaking and suspect films, clean them thoroughly with abrasive cleaner, rinse and allow to dry thoroughly. Hard 2 pack floor paints may need abrasion to give a key. Inferior floor paints are best removed where practical.

Application

Apply by brush, roller or airless spray. Allow new concrete to fully dry and cure. Do not apply in damp conditions when condensation may form or below 4°C. Stir base and activator thoroughly, then mix, stirring well to create a homogenous mix (use of a paint stirrer on an electric drill is recommended). Pot life once mixed 2 hours.

To Bare Unpainted Floors:
Apply TWO COATS at 8m² per kg, thin first coat 10% with water.
Apply 2nd coat 16 > 72 hrs after 1st coat*.

To Previously Painted Floors:
Apply two coats at 10m² per kg/per coat.
Apply 2nd coat 16 > 72 hrs after 1st coat*.

*Overcoat times @ 20°C. In colder temperatures or humidty extend overcoat times.

Drying & Curing Times
Touch dry: 4 hours
Hard dry (foot traffic): 8 - 12 hours
Full cure 5 - 7 days

Times stated @ 20°C. Colder temperatures and high humidity extend drying, curing, and hardening times.