FIRE TEST PERFORMANCE
Tested on a wide range of wooden doors, achieving 60 minutes integrity and either 30 or 60-minute fire protection and insulation according to BS476 Part22.
Up to 60 minutes fire protection achieved on open joists and floorboards according to BS476 Part 20.
90-minute fire rating achieved on timber mouldings and carcasses according to BS476 Part 20.
Tested on a range of timber types, including plywood and MDF, complying with BS476 Parts 6 & 7, Classes 0 & 1 (Spread of Flame).
Tested to European Standard EN1364-1, achieving 66 minutes integrity.
Complies with Classification B/S1/d0 of European Standard EN13823, single burn test (SBI) and EN11925-2 (ignitability).
– A lasting solution for internal and external treated or untreated wood- Can be used on insulation board, MDF board, plasterboard, timber and a wide variety of wood-derived products, including doors, flooring and furniture
– Perfect for upgrading existing wooden doors to 30 or 60-minute fire doors – no need to replace them!
– With the use of our primer, coatings can be applied on painted or varnished surfaces with no need to strip them beforehand
– Provides UV protection for external timber surfaces
A water-based product to apply over existing paint, varnish or wax surfaces, before applying other coatings.
1 litre 2½ litres 5 litres
HW02 Clear intumescent Coating
HW02 is a water-based product that MUST have a protective Top Sealer Coat applied. Once coated, HW02 will last the life of the Top Coat. If the Top Coat is re-applied at the end of the cycle, HW02 will continue to offer fire protection for life. For INTERNAL & EXTERNAL use.
1 litre 2½ litres 5 litres 20 litre buckets
Overcoat with Waterbased Topcoats:
WBI Fire Protect Topcoat Clear (Interior)
WBE Fire Protect Topcoat Clear (Exterior)
Or Overcoat with Solvent Topcoats:
SBI Topcoat Clear (Interior)
HW03 Superb Topcoat Clear Matt Satin or Gloss Exterior