Cuprinol Quick Drying Cladding & Fence Opaque Finish is a high performance water-based opaque exterior woodstain for the protection and decoration of exterior non-joinery timber such as cladding, garden structures and rough sawn or smooth fencing.
|Product Type||Wood Stain|
|Short Description||Quick Drying High Performance Wood Protection|
|Coverage||Smooth wood - up to 12m2 per litre ,Rough sawn wood - up to 6m2 per litre|
|General No. of Coats||2|
|Application description||Application by brush and/or roller: stir thoroughly before and during use. Minimum two coats required. Application by spray: shake pack thoroughly before pouring contents into a Cuprinol sprayer. As with any sprayer it may take a couple of minutes to perfect your technique. Ensure you spray with the nozzle 15-30cm from the wood surface. Begin slowly and increase the pace as you get used to spraying. Take care not to spray too quickly as this may result in an uneven finish. Similarly, spraying too slowly will result in excess product being applied causing runs. Should this happen, simply brush into the wood. Avoid spraying surrounding plants, brickwork, glass, PVCu, etc. Overspray can be minimised by avoiding spraying in windy conditions and by using cardboard or plastic as a shield. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent. Excessive spillage on plants should be rinsed off immediately before drying. Cover any surfaces nearby to protect from overspray. Two coats of Cuprinol Quick Drying Cladding & Fence Opaque Finish will normally be required to produce a completely opaque finish. Allow the first coat to dry before applying the second. Cold, humid conditions will slow drying and may affect the final appearance and durability.|
|Cleaning||Remove product from the brush with a cloth and then wash with water|
|Storage||Do not use or store in extremes of temperature and protect from frost|