Description
Dulux Trade Stain Block Matt is a water-based primer/topcoat suitable for use on interior walls and ceilings. It is formulated to prevent the migration of stains through the finished paint film and also to seal and bind dry, friable and powdery interior surfaces such as plaster, brick and distemper. It is the effective treatment for stains caused by: water-based and solvent-based inks, crayon, biro, coffee, grease, scuff marks, water and nicotine.
| Product Type | Paint |
| Short Description | A 2-in-1 problem solving primer and topcoat that seals and binds surfaces and blocks common stains |
| Drying time (recoat) | After 6-12 hours. Note - this product can usually be recoated within 6-8 hours - but on very porous surfaces a longer drying time may be required. |
| Drying time (touch dry) | Dependent on temperature and humidity |
| Suitable Surface | Walls, Ceilings, Drywall |
| Coverage | Up to 14m² per litre. |
| General No. of Coats | 1 |
| Application description | Application : Brush or short pile roller. Do not spray. STIR THOROUGHLY BEFORE USE. After suitable surface application, apply 1 coat of Dulux Trade Stain Block Primer to all bare or stained surfaces to allow to dry. Two coats will be necessary for difficult stains. Finish with 1 coat of Dulux Trade Stain Block Matt or an appropriate Dulux Trade paint system. |
| Cleaning | After use, remove as much paint as possible from brushes before cleaning with water |
| Storage | Do not use or store in extremes of temperature and protect from frost |