Envirograf HW Ultra White Interior Topcoat

Envirograf HW Ultra TopCoat is a water based product to apply over Envirograf HW01 White Intumescent Coating: 

  • Available in Matt Satin or Gloss finishes
  • Gives a high quality durable finish for internal use
  • Suitable for use on all types of timber substrate


  • Sale
  • Regular price £16.86
Shipping calculated at checkout.


HW Ultra White Topcoat is a water-based finish, to go over the top of HW01, ES/VFR White and EP/FS/INT. It is only suitable for internal use and comes in matt, satin, or gloss.

If purchased off the website, it will come as white, but it can also be tinted to most RAL and BS colour codes.

Application of Ultra White Topcoat:

Can be applied with a brush, roller or sprayer and has a theoretical coverage rate of 10m² per litre.

All surfaces should be clean, dry and free from contamination.

Ultra White is ready for use and does not need thinning. Stir well before application.

The result is dependent on the condition of the substrate and temperature of application.

Clean tools and spillages immediately with warm water.

Containers must be kept tightly closed and stored at a minimum temperature of 5°C and a maximum temperature of 35°C.

Ensure good ventilation during application and drying. Do not inhale vapour or spray mist.

Avoid contact with skin and eyes. Wear suitable protective clothing including gloves and eye/face protection. Wear a mask when spraying.

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

After contact with skin, wash immediately with plenty of soap and water or a recognised skin cleaner. Do not use solvent or thinners.

Do not ingest. If swallowed seek medical advice immediately.

Keep out of the reach of children.